Serprog: Difference between revisions

From flashrom
Jump to navigation Jump to search
No edit summary
(→‎Frser-duino: fix typo)
(81 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:serprog}}
{{DISPLAYTITLE:serprog}}
This page is a first draft only and serves to collect information about the serprog protocol and the programmers implementing it.
This page collects information about the serprog protocol and the programmers implementing it.


= Protocol =
= Protocol =


See [http://flashrom.org/trac/flashrom/browser/trunk/Documentation/serprog-protocol.txt serprog-protocol.txt] in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.
See [http://code.coreboot.org/p/flashrom/source/tree/HEAD/trunk/Documentation/serprog-protocol.txt serprog-protocol.txt] in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.
 
There is a draft for an extension of the serprog protocol to SPI. FIXME: Link there.
 
Note that beside the really mandatory serprog commands, if you also implement the O_SPIOP command correctly, it should be enough for flashrom from svn to work correctly.


= Hardware =
= Hardware =
Line 16: Line 12:
[[File:Avr rs232 programmer.jpg|thumb|right|Prototype RS232 AVR parallel flash programmer]]
[[File:Avr rs232 programmer.jpg|thumb|right|Prototype RS232 AVR parallel flash programmer]]


The [http://www.randomprojects.org/wiki/Prototype_RS232_AVR_parallel_flash_programmer Prototype RS232 AVR parallel flash programmer] Urja Rannikko was the first implementation of the serprog protocol.
The [http://www.randomprojects.org/wiki/Prototype_RS232_AVR_parallel_flash_programmer Prototype RS232 AVR parallel flash programmer] of Urja Rannikko was the first implementation of the serprog protocol.


FIXME: AVR source code is somewhere in the coreboot mailing list archives...
The source code can be found [http://github.com/urjaman/frser-atmega88 here].


== AVR flasher by eightdot ==
== AVR flasher by eightdot ==
Line 24: Line 20:
FIXME: Link?
FIXME: Link?


== Arduino Mega flasher by fritz ==
== InSystemFlasher by Juhana Helovuo ==
This was the first one that talks to SPI devices via serial over USB. Details can be found in the [http://www.coreboot.org/InSystemFlasher coreboot wiki] and in this [http://www.coreboot.org/pipermail/coreboot/2011-February/063349.html coreboot mailing list thread].
 
== atmegaXXu2-flasher by Stefan Tauner ==
Like the InSystemFlasher this one uses LUFA on an AVR microcontroller to tunnel the serial data over USB.
[[File:atmegaXXu2-flasher.jpg|thumb|right|atmegaXXu2-flasher with Pomona SOIC hook attached]]
 
== Various Arduino based flashers ==


[http://www.flashrom.org/pipermail/flashrom/2010-May/003250.html]
=== Frser-duino ===
[http://www.coldelectrons.com/blog/?page_id=165]
This project contains [https://github.com/urjaman/frser-duino/ source code] to install on Arduino devices.
FIXME: More info?


== Arduino Uno flasher by GNUtoo ==
That person also have various ports [https://github.com/urjaman?tab=repositories on github] for several microcontroller boards, such as:
This flasher require the following hardware parts:
* [https://github.com/urjaman/frser-teensyflash frser-teensyflash]: A port for the teensy microcontroller board
* An arduino uno and its usb cable
* some wires(optionally some connectors to solder on(for easier plugin and more reliability)
* a 10k resistor
* a flash chip to flash


=== Pictures ===
There also vaious other interesting projects such as:
[[Image:Serprog-duino-top.JPG|250px]]
* [https://github.com/urjaman/fast-usbserial fast-usbserial]: A software to make arduino with 8u2 or 16u2 flashing faster and more reliable]
[[Image:serprog-duino-flash.JPG|250px]]
* [[Serprog/Arduino_flasher#Alternative:_Shield_with_SPI_and_LPC.2FFWH_for_5V_Arduinos|An Arduino shield for flashing]]
[[Image:serprog-duino-arduino.JPG|250px]]
Note that the resistor is lacking on the pictures because they are early pictures. Without it I wasn't able to obtain a stable programming of the chip.


=== Building ===
=== Using a 5v Arduino at 3.3V ===
Information on it can be found in the [[Arduino_flasher_3.3v]] page


Left pins of the BIOS chip:
=== 5V arduino with level shifter ===
--------------------------------------------------------
For detailed instructions on how to use different Arduino models to access SPI flash chips see [[Serprog/Arduino flasher]].
[pin1 of the bios chip] /CS<->10k resistor<->VCC
[[File:Serprog_0001.jpeg|thumb|right|Arduino Uno connected using a breadboard]]
[pin1 of the bios chip] /CS<->Arduino pin10(SS, PORTB2)
[pin2 of the bios chip] DO<->Arduino pin12(MISO, PORTB4)
[pin3 of the bios chip] /WP<->VCC
[pin4 of the bios chip] GND<->GND on the power pins
Right pins of the BIOS chip:
--------------------------------------------------------
[pin8 of the bios chip] VCC<->+3.3V on the power pins of the Arduino
[pin7 of the bios chip] /HOLD<->VCC
[pin6 of the bios chip] CLK<->Arduino pin13(SCK, PORTB5)
[pin5 of the bios chip] DIO<->Arduino pin11(MOSI, PORTB3)
The Bios chip used is a W25X80.
The Arduino is an arduino uno.


=== Software ===
=== Arduino Mega flasher by fritz ===
==== Required software ====
To make it work you need:
* flashrom from svn
* [https://gitorious.org/gnutoo-personal-arduino-projects/serprog-duino serprog-duino which runs on the arduino]
* The avr toolchain(avr-gcc, avr-libc,make etc...)
==== Building the software ====
$ svn co svn://flashrom.org/flashrom/trunk flashrom
$ cd flashrom && make
$ cd ../
$ git clone git://gitorious.org/gnutoo-personal-arduino-projects/serprog-duino.git
$ cd serprog-duino && make && make upload


==== Running flashrom ====
[http://www.flashrom.org/pipermail/flashrom/2010-May/003016.html]
./flashrom -p serprog:dev=/dev/ttyACM0:57600
[http://www.coldelectrons.com/blog/?p=115]
[http://www.coldelectrons.com/blog/wp-content/uploads/2010/05/flashprg.txt]


=== Advantages and disadvantages ===
Some information is lacking on this flasher, such as the software used in it. Feel free to add information on it if you find some.
* While the speed isn't that great(less than 10 minutes for reading+writing+verifying a 1M chip), there is huge room for improvements in the source code.
* it is made of very commonly available parts(if you can find an arduino uno, you will be able to build it).


== InSystemFlasher by Juhana Helovuo ==
== Teensy 3.1 SPI + LPC/FWH Flasher ==
This is one uses a modified serprog version to talk to SPI devices via serial over USB. Details can be found in the [http://www.coreboot.org/InSystemFlasher coreboot wiki] and in this [http://www.coreboot.org/pipermail/coreboot/2011-February/063349.html coreboot mailing list thread].
[[Teensy 3.1 SPI + LPC/FWH Flasher|A Teensy 3.1 based small flasher by Urja Rannikko.]]
 
 
== serprog-stm32vcp by Chi Zhang ==


== atmegaXXu2-flasher by Stefan Tauner ==
The most powerful serprog-based programmer is built upon an ARM Cortex-M3 (STM32F103) featuring up to 36 MHz SPI clock.
Like the InSystemFlasher this one uses LUFA on an AVR microcontroller to tunnel the serial data over USB. To be updated when flashrom's serprog module has the needed changes merged to do SPI communication.
See [http://github.com/dword1511/serprog-stm32vcp#serprog-stm32vcp his github page] for further details, source code etc.
[[File:atmegaXXu2-flasher.jpg|200px|thumb|right|atmegaXXu2-flasher with Pomona SOIC hook attached]]
[[File:Serprog-stm32vcp.jpg|thumb|right|serprog-stm32vcp]]

Revision as of 15:22, 27 February 2018

This page collects information about the serprog protocol and the programmers implementing it.

Protocol

See serprog-protocol.txt in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.

Hardware

AVR flasher by Urja Rannikko

Prototype RS232 AVR parallel flash programmer

The Prototype RS232 AVR parallel flash programmer of Urja Rannikko was the first implementation of the serprog protocol.

The source code can be found here.

AVR flasher by eightdot

FIXME: Link?

InSystemFlasher by Juhana Helovuo

This was the first one that talks to SPI devices via serial over USB. Details can be found in the coreboot wiki and in this coreboot mailing list thread.

atmegaXXu2-flasher by Stefan Tauner

Like the InSystemFlasher this one uses LUFA on an AVR microcontroller to tunnel the serial data over USB.

atmegaXXu2-flasher with Pomona SOIC hook attached

Various Arduino based flashers

Frser-duino

This project contains source code to install on Arduino devices.

That person also have various ports on github for several microcontroller boards, such as:

There also vaious other interesting projects such as:

Using a 5v Arduino at 3.3V

Information on it can be found in the Arduino_flasher_3.3v page

5V arduino with level shifter

For detailed instructions on how to use different Arduino models to access SPI flash chips see Serprog/Arduino flasher.

Arduino Uno connected using a breadboard

Arduino Mega flasher by fritz

[1] [2] [3]

Some information is lacking on this flasher, such as the software used in it. Feel free to add information on it if you find some.

Teensy 3.1 SPI + LPC/FWH Flasher

A Teensy 3.1 based small flasher by Urja Rannikko.


serprog-stm32vcp by Chi Zhang

The most powerful serprog-based programmer is built upon an ARM Cortex-M3 (STM32F103) featuring up to 36 MHz SPI clock. See his github page for further details, source code etc.

serprog-stm32vcp