Serprog: Difference between revisions

From flashrom
Jump to navigation Jump to search
No edit summary
(Update serprog-protocol.txt url)
 
(18 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:serprog}}
{{DISPLAYTITLE:serprog}}
This page is a first draft only and serves to collect information about the serprog protocol and the programmers implementing it.
This page collects information about the serprog protocol and the programmers implementing it.


= Protocol =
= Protocol =


See [http://flashrom.org/trac/flashrom/browser/trunk/Documentation/serprog-protocol.txt serprog-protocol.txt] in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.
See [https://review.coreboot.org/plugins/gitiles/flashrom/+/refs/heads/master/Documentation/serprog-protocol.txt serprog-protocol.txt] in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.


= Hardware =
= Hardware =
Line 12: Line 12:
[[File:Avr rs232 programmer.jpg|thumb|right|Prototype RS232 AVR parallel flash programmer]]
[[File:Avr rs232 programmer.jpg|thumb|right|Prototype RS232 AVR parallel flash programmer]]


The [http://www.randomprojects.org/wiki/Prototype_RS232_AVR_parallel_flash_programmer Prototype RS232 AVR parallel flash programmer] Urja Rannikko was the first implementation of the serprog protocol.
The [http://www.randomprojects.org/wiki/Prototype_RS232_AVR_parallel_flash_programmer Prototype RS232 AVR parallel flash programmer] of Urja Rannikko was the first implementation of the serprog protocol.


FIXME: AVR source code is somewhere in the coreboot mailing list archives...
The source code can be found [http://github.com/urjaman/frser-atmega88 here].


== AVR flasher by eightdot ==
== AVR flasher by eightdot ==


FIXME: Link?
FIXME: Link?
== Arduino Mega flasher by fritz ==
[http://www.flashrom.org/pipermail/flashrom/2010-May/003250.html]
[http://www.coldelectrons.com/blog/?page_id=165]
[http://www.coldelectrons.com/blog/wp-content/uploads/2010/05/flashprg.txt]
FIXME: More info?


== InSystemFlasher by Juhana Helovuo ==
== InSystemFlasher by Juhana Helovuo ==
This is one talks to SPI devices via serial over USB. Details can be found in the [http://www.coreboot.org/InSystemFlasher coreboot wiki] and in this [http://www.coreboot.org/pipermail/coreboot/2011-February/063349.html coreboot mailing list thread].
This was the first one that talks to SPI devices via serial over USB. Details can be found in the [http://www.coreboot.org/InSystemFlasher coreboot wiki] and in this [http://www.coreboot.org/pipermail/coreboot/2011-February/063349.html coreboot mailing list thread].


== atmegaXXu2-flasher by Stefan Tauner ==
== atmegaXXu2-flasher by Stefan Tauner ==
Line 34: Line 27:
[[File:atmegaXXu2-flasher.jpg|thumb|right|atmegaXXu2-flasher with Pomona SOIC hook attached]]
[[File:atmegaXXu2-flasher.jpg|thumb|right|atmegaXXu2-flasher with Pomona SOIC hook attached]]


== Various Arduino based flashers ==
=== Frser-duino ===
This project contains [https://github.com/urjaman/frser-duino/ source code] to install on Arduino devices.
That person also have various ports [https://github.com/urjaman?tab=repositories on github] for several microcontroller boards, such as:
* [https://github.com/urjaman/frser-teensyflash frser-teensyflash]: A port for the teensy microcontroller board
There also vaious other interesting projects such as:
* [https://github.com/urjaman/fast-usbserial fast-usbserial]: A software to make arduino with 8u2 or 16u2 flashing faster and more reliable]
* [[Serprog/Arduino_flasher#Alternative:_Shield_with_SPI_and_LPC.2FFWH_for_5V_Arduinos|An Arduino shield for flashing]]


== Arduino flasher by GNUtoo ==
=== Using a 5v Arduino at 3.3V ===
Information on it can be found in the [[Arduino_flasher_3.3v]] page


For detailed instructions on how to use different Arduino models to access SPI flash chips see [[Arduino flasher]].
=== 5V arduino with level shifter ===
For detailed instructions on how to use different Arduino models to access SPI flash chips see [[Serprog/Arduino flasher]].
[[File:Serprog_0001.jpeg|thumb|right|Arduino Uno connected using a breadboard]]
[[File:Serprog_0001.jpeg|thumb|right|Arduino Uno connected using a breadboard]]
=== Arduino Mega flasher by fritz ===
[http://www.flashrom.org/pipermail/flashrom/2010-May/003016.html]
[http://www.coldelectrons.com/blog/?p=115]
[http://www.coldelectrons.com/blog/wp-content/uploads/2010/05/flashprg.txt]
Some information is lacking on this flasher, such as the software used in it. Feel free to add information on it if you find some.
== Teensy 3.1 SPI + LPC/FWH Flasher ==
[[Teensy 3.1 SPI + LPC/FWH Flasher|A Teensy 3.1 based small flasher by Urja Rannikko.]]
== HydraBus multi-tool ==
HydraBus (hardware) with HydraFW (firmware) is an open source multi-tool for learning, developing, debugging, hacking and penetration testing of embedded hardware.
It is built upon an ARM Cortex-M4 (STM32F405). The source code for HydraFW is [https://github.com/hydrabus/hydrafw available on GitHub].
Refer to [https://github.com/hydrabus/hydrafw/wiki/HydraFW-SPI-guide#flashrom-usage their GitHub Wiki] for more details on how to use HydraBus with flashrom.
[[File:HydraFW_Default_PinAssignment.png|thumb|right|HydraBus board with HydraFW default pin mapping]]


== serprog-stm32vcp by Chi Zhang ==
== serprog-stm32vcp by Chi Zhang ==

Latest revision as of 09:07, 24 October 2022

This page collects information about the serprog protocol and the programmers implementing it.

Protocol

See serprog-protocol.txt in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.

Hardware

AVR flasher by Urja Rannikko

Prototype RS232 AVR parallel flash programmer

The Prototype RS232 AVR parallel flash programmer of Urja Rannikko was the first implementation of the serprog protocol.

The source code can be found here.

AVR flasher by eightdot

FIXME: Link?

InSystemFlasher by Juhana Helovuo

This was the first one that talks to SPI devices via serial over USB. Details can be found in the coreboot wiki and in this coreboot mailing list thread.

atmegaXXu2-flasher by Stefan Tauner

Like the InSystemFlasher this one uses LUFA on an AVR microcontroller to tunnel the serial data over USB.

atmegaXXu2-flasher with Pomona SOIC hook attached

Various Arduino based flashers

Frser-duino

This project contains source code to install on Arduino devices.

That person also have various ports on github for several microcontroller boards, such as:

There also vaious other interesting projects such as:

Using a 5v Arduino at 3.3V

Information on it can be found in the Arduino_flasher_3.3v page

5V arduino with level shifter

For detailed instructions on how to use different Arduino models to access SPI flash chips see Serprog/Arduino flasher.

Arduino Uno connected using a breadboard

Arduino Mega flasher by fritz

[1] [2] [3]

Some information is lacking on this flasher, such as the software used in it. Feel free to add information on it if you find some.

Teensy 3.1 SPI + LPC/FWH Flasher

A Teensy 3.1 based small flasher by Urja Rannikko.

HydraBus multi-tool

HydraBus (hardware) with HydraFW (firmware) is an open source multi-tool for learning, developing, debugging, hacking and penetration testing of embedded hardware. It is built upon an ARM Cortex-M4 (STM32F405). The source code for HydraFW is available on GitHub. Refer to their GitHub Wiki for more details on how to use HydraBus with flashrom.

HydraBus board with HydraFW default pin mapping

serprog-stm32vcp by Chi Zhang

The most powerful serprog-based programmer is built upon an ARM Cortex-M3 (STM32F103) featuring up to 36 MHz SPI clock. See his github page for further details, source code etc.

serprog-stm32vcp