User:GNUtoo: Difference between revisions

From flashrom
Jump to navigation Jump to search
(→‎Mainboard based programmers: I don't have it anymore)
Line 27: Line 27:
|-
|-
| Lenovo X60
| Lenovo X60
|
| SST25VF016B
|
|
* Yes with coreboot.
* Yes with coreboot.

Revision as of 21:03, 12 February 2015

I've no code in flashrom yet, but I made a flashrom compatible arduino programmer and participated in testing and documentation.


My hardware

Mainboard based programmers

Device or programmer Flash chip Test result
Asus M4A785T-M mainboard W25x80 (DIP8)
  • Yes with the BIOS
  • Yes with coreboot
Asrock E350M1 A25L032
  • Yes from coreboot
  • Untested from the BIOS
Lenovo X60 MX25L1605D/MX25L1608D
  • Yes with coreboot.
Lenovo X60 SST25VF016B
  • Yes with coreboot.
Lenovo X60T MX25L1605D/MX25L1608D
  • Yes with coreboot
Lenovo T60 MX25L1605D/MX25L1608D
  • Yes with coreboot
PCEngines Alix.1c
  • Yes with coreboot
  • Yes with the recovery LPC dongle
Asus N71JQ
  • Requires some bit flippings(with ifdtool and an external programmer) in the flash descriptor.
  • Not tested internally.

External programmers

Device or programmer Status
Arduino uno (serprog)
  • Requires a 5v->3.3v level shifter for most current flash chips.
  • Issues with the 8u2/8u3 when using the serial port at high speed.
Arduino duemillanove (serprog)
  • Requires a 5v->3.3v level shifter for most current flash chips.
  • Works fine otherwise.
Arduino Due ( no support for it yet )
  • 3.3v level output on SPI.
  • Not working: No support for it yet.
openmoko debug board (ft2232_spi:type=openmoko)
  • Works fine
3com PCI NIC (10b7:9200) (nic3com)
  • Works fine
Sata SII PCI card
  • writing and erasing worked fine.
Really old PCI realtek cards
  • No parallel chip to test
Some GNU/Linux embedded boards (linux_spi)
  • Backporting some mainline kernel patches is required on some very old (2.6.35) kernel for omap3.
  • Works fine otherwise
An atahpt PCI card
  • Didn't work when adding the PCI IDS, but the atahpt is known not to work according to the mailing list.
old AGP Nvidia card
  • Worked with a patch (documented below)
Nvidia geforce 210 PCIe 16x card
  • didn't work when adding the PIC IDs

I've also the following hardware:

  • pomona clip for recovering my x60
  • some chips(2MB SO8(currently soldered), 16MB SO8)

Work in progress for the wiki

Don't try that, it's dangerous!!!!

Howto(Dangerous, not ready for the wiki)