[flashrom] Failed BIOS Flash Assistance

bas nowaira bas429 at gmail.com
Wed Dec 30 22:42:04 CET 2009


On Wed, Dec 30, 2009 at 10:28 AM, Michael Karcher
<flashrom at mkarcher.dialup.fu-berlin.de> wrote:
> Am Montag, den 28.12.2009, 15:21 -0500 schrieb bas nowaira:
>> Greetings,
>>
>> Per my conversation with agaran on irc, please find the attached log of:
>> < agaran> !summary bassem
>> < flashrom_bot> bassem: please mail the output of 'flashrom -V',
>> 'lspci -nnvvvxxx', 'superiotool -deV' (all commands as root), the
>> exact
>>                       name of your board (including revision, if there
>> are multiple revisions), and a link to the official BIOS download to
>>                       flashrom at flashrom.org
>>
>> I appreciate all the assistance you can provide.
>
> The included patch should make flashing on your system possible. As it
> is quite big (generic SuperI/O infrastructure for an yet unsupported
> chip), it is possible that it doesn't work on the first attempt.
>
> If it works, please reply to this mail (keeping the Cc: to
> flashrom at flashrom.org) containing
> "Acked by: bas nowaira <bas429 at gmail.com>"
> (without the quotes)
> If it doesn't work, please reply quoting the whole output of flashrom -V
> of the patched version.
>
> Regards,
>  Michael Karcher
>
> Signed-Off-By: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>
>
> Index: board_enable.c
> ===================================================================
> --- board_enable.c      (Revision 824)
> +++ board_enable.c      (Arbeitskopie)
> @@ -205,7 +205,50 @@
>        return 0;
>  }
>
> +static int pc87360_gpio_set(uint8_t gpio, int raise)
> +{
> +        static const int bankbase[] = {0, 4, 8, 10, 12};
> +        int gpio_bank = gpio / 8;
> +        int gpio_pin = gpio % 8;
> +        uint16_t baseport;
> +        uint8_t id;
> +        uint8_t val;
>
> +        if (gpio_bank > 4)
> +        {
> +                fprintf(stderr, "PC87360: Invalid GPIO %d\n", gpio);
> +                return -1;
> +        }
> +
> +        id = sio_read(0x2E, 0x20);
> +        if (id != 0xE1)
> +        {
> +                fprintf(stderr, "PC87360: unexpected ID %02x\n", id);
> +                return -1;
> +        }
> +
> +        sio_write(0x2E, 0x07, 0x07);           /* select GPIO device */
> +        baseport = (sio_read(0x2E, 0x60) << 8) | sio_read(0x2E, 0x61);
> +        if((baseport & 0xFFF0) == 0xFFF0 || baseport == 0)
> +        {
> +                fprintf (stderr, "PC87360: invalid GPIO base address %04x\n",
> +                         baseport);
> +                return -1;
> +        }
> +        sio_mask (0x2E, 0x30, 0x01, 0x01);     /* Enable logical device */
> +        sio_write(0x2E, 0xF0, gpio_bank*16 + gpio_pin);
> +        sio_mask (0x2E, 0xF1, 0x01, 0x01);     /* Make pin output */
> +
> +        val = INB(baseport + bankbase[gpio_bank]);
> +        if(raise)
> +                val |= 1 << gpio_pin;
> +        else
> +                val &= ~(1 << gpio_pin);
> +        OUTB(val, baseport + bankbase[gpio_bank]);
> +
> +        return 0;
> +}
> +
>  /**
>  * VT823x: Set one of the GPIO pins.
>  */
> @@ -889,6 +932,21 @@
>  }
>
>  /**
> + * Suited for HP Vectra VL400: 815 + ICH + PC87360.
> + */
> +
> +static int board_hp_vl400(const char *name)
> +{
> +        int ret;
> +        ret = intel_ich_gpio_set(25, 1);       /* Master write enable ? */
> +        if (!ret)
> +                ret = pc87360_gpio_set(0x09, 1);       /* #WP ? */
> +        if (!ret)
> +                ret = pc87360_gpio_set(0x27, 1);       /* #TBL */
> +        return ret;
> +}
> +
> +/**
>  * Suited for:
>  *   - Biostar P4M80-M4: VIA P4M800 + VT8237 + IT8705AF
>  *   - GIGABYTE GA-7VT600: VIA KT600 + VT8237 + IT8705
> @@ -1207,6 +1265,7 @@
>        {0x1002, 0x4398, 0x1458, 0x5004,  0x1002, 0x4391, 0x1458, 0xb002, NULL,         NULL,          "GIGABYTE",    "GA-MA78GM-S2H",      it87xx_probe_spi_flash},
>        {0x1002, 0x438d, 0x1458, 0x5001,  0x1002, 0x5956, 0x1002, 0x5956, NULL,         NULL,          "GIGABYTE",    "GA-MA790FX-DQ6",     it87xx_probe_spi_flash},
>        {0x1166, 0x0223, 0x103c, 0x320d,  0x102b, 0x0522, 0x103c, 0x31fa, "hp",         "dl145_g3",    "HP",          "DL145 G3",           board_hp_dl145_g3_enable},
> +       {0x8086, 0x2415, 0x103c, 0x1249,  0x10b7, 0x9200, 0x103c, 0x1246, NULL,         NULL,          "HP",          "Vectra VL400",       board_hp_vl400},
>        {0x1166, 0x0205, 0x1014, 0x0347,  0x1002, 0x515E, 0x1014, 0x0325, NULL,         NULL,          "IBM",         "x3455",              board_ibm_x3455},
>        {0x1039, 0x5513, 0x8086, 0xd61f,  0x1039, 0x6330, 0x8086, 0xd61f, NULL,         NULL,          "Intel",       "D201GLY",            wbsio_check_for_spi},
>        {0x1022, 0x7468,      0,      0,       0,      0,      0,      0, "iwill",      "dk8_htx",     "IWILL",       "DK8-HTX",            w83627hf_gpio24_raise_2e},
>
Acked-By: bas nowaira <bas429 at gmail.com>
>
>



-- 
/* bas */




More information about the flashrom mailing list