[flashrom] [PATCH] FT2232 error checking

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Tue Nov 10 04:07:30 CET 2009


Pretty much everybody who used the FT2232 SPI driver in flashrom had
problems with incorrect reads from time to time.
One reason was that the hardware is pretty timing sensitive even for reads.

The other reason was that the code silently ignored errors. This patch
doesn't add any error recovery, but it will emit error messages if
FT2232 communication goes wrong. That allows us to track down errors
without investing hours in driver debugging.

Jeremy, I'd be very interested in the results of an unmodified flashrom
with only this patch applied (read is sufficient). In theory, you should
either get a working read or loads of error messages about
send_buf/read_buf. If you get no error messages and the image read is
still wrong, libftdi doesn't tell us about the problem. Oh, and please
try in verbose and normal mode. Maybe there's a difference.

This patch will show up at
http://patchwork.coreboot.org/project/flashrom/list/ in a few minutes.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Index: flashrom-ft2232_errorcheck/ft2232_spi.c
===================================================================
--- flashrom-ft2232_errorcheck/ft2232_spi.c	(Revision 756)
+++ flashrom-ft2232_errorcheck/ft2232_spi.c	(Arbeitskopie)
@@ -198,7 +198,8 @@
 {
 	struct ftdi_context *ftdic = &ftdic_context;
 	static unsigned char *buf = NULL;
-	int i = 0, ret = 0;
+	/* failed is special. We use bitwise ops, but it is essentially bool. */
+	int i = 0, ret = 0, failed = 0;
 
 	if (writecnt > 65536 || readcnt > 65536)
 		return SPI_INVALID_LENGTH;
@@ -237,6 +238,11 @@
 		buf[i++] = (readcnt - 1) & 0xff;
 		buf[i++] = ((readcnt - 1) >> 8) & 0xff;
 		ret = send_buf(ftdic, buf, i);
+		failed = ret;
+		/* We can't abort here, we still have to deassert CS#. */
+		if (ret)
+			fprintf(stderr, "send_buf failed before read: %i\n",
+				ret);
 		i = 0;
 		if (ret == 0) {
 			/*
@@ -245,6 +251,10 @@
 			 * command. We may be scheduled out etc.
 			 */
 			ret = get_buf(ftdic, readarr, readcnt);
+			failed |= ret;
+			/* We can't abort here either. */
+			if (ret)
+				fprintf(stderr, "get_buf failed: %i\n", ret);
 		}
 	}
 
@@ -252,10 +262,12 @@
 	buf[i++] = SET_BITS_LOW;
 	buf[i++] = CS_BIT;
 	buf[i++] = 0x0b;
-	if (send_buf(ftdic, buf, i))
-		return -1;
+	ret = send_buf(ftdic, buf, i);
+	failed |= ret;
+	if (ret)
+		fprintf(stderr, "send_buf failed at end: %i\n", ret);
 
-	return ret;
+	return failed ? -1 : 0;
 }
 
 int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len)


-- 
Developer quote of the week: 
"We are juggling too many chainsaws and flaming arrows and tigers."





More information about the flashrom mailing list