[flashrom] [PATCH] Add support for every single SiS chipset out there
Adrian Glaubitz
adrian.glaubitz at googlemail.com
Sun Nov 15 17:49:56 CET 2009
Hi Carl-Daniel,
On Sun, Nov 15, 2009 at 5:03 PM, Carl-Daniel Hailfinger
<c-d.hailfinger.devel.2006 at gmx.net> wrote:
> Hi,
>
> On 15.11.2009 15:08, Adrian Glaubitz wrote:
>> here is an output of flashrom r758 together with your patch on 2 SiS boards:
>>
>> AsRock K7S8XE: http://pastebin.org/53847
>> Elitegroup K7S5A: http://pastebin.org/53846
>>
>
> Thanks for the reports!
>
> New patch. Can you please reply with the output from "flashrom -V",
> "lspci -nnvvvxxx", "superiotool -dV" for each board, one board per mail,
> output as attachment? Thanks.
Attaching requested output for AsRock K7S8XE. Writing flash does not
work (at least, flashrom doesn't offer it yet for this board).
Adrian
-------------- next part --------------
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 746 Host [1039:0746] (rev 10)
Subsystem: ASRock Incorporation Device [1849:0746]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00: 39 10 46 07 07 00 10 22 10 00 00 06 00 00 00 00
10: 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 07
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 29 3f 77 77 06 00 32 22 aa d4 e8 f0 e0 00 00 00
50: 17 00 00 04 00 00 04 f0 01 25 00 00 12 d3 93 40
60: 4b 4b 4b 40 07 1a 03 00 01 08 00 00 88 00 1c 00
70: 0f 80 00 00 00 00 00 00 00 00 00 00 02 00 00 44
80: 22 26 32 03 85 00 80 0b 20 0c 00 01 00 00 00 30
90: 00 00 71 2f 43 00 00 05 00 0e 02 00 b4 75 00 00
a0: 23 23 85 12 00 00 02 00 00 00 00 00 02 00 00 03
b0: 00 00 00 00 08 18 00 a4 00 9a 10 80 00 00 00 00
c0: 02 00 20 00 17 02 00 1f 04 03 00 00 00 00 00 00
d0: 02 40 31 06 09 00 80 01 60 60 aa 12 aa a0 aa 00
e0: 55 2a 2a 14 98 00 54 54 05 50 00 00 00 00 00 50
f0: 5a 1c 49 dc 15 7d 00 00 00 00 00 00 03 0a 03 0a
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: cf900000-cfafffff
Prefetchable memory behind bridge: bf600000-cf7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00: 39 10 02 00 07 01 00 00 00 00 04 06 00 20 01 00
10: 00 00 00 00 00 00 00 00 00 01 02 20 b0 b0 00 20
20: 90 cf a0 cf 60 bf 70 cf 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] [1039:0963] (rev 25)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: 39 10 63 09 0f 00 00 02 25 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: db 8b 80 8a 85 40 21 fd 10 00 00 00 11 30 04 03
50: 11 38 02 01 60 00 20 0b 00 00 12 00 a6 0b b6 00
60: 8a 83 80 85 ff c1 0a 13 09 80 00 40 05 00 04 11
70: 00 00 ff ff 00 08 00 08 00 00 00 80 06 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41
d0: 00 00 00 00 00 62 30 00 85 00 80 3b aa aa aa aa
e0: 40 00 00 58 42 20 44 00 11 04 00 00 00 00 00 00
f0: 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
Kernel driver in use: sis96x_smbus
Kernel modules: i2c-sis96x
00: 39 10 16 00 01 00 80 02 00 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (prog-if 80 [Master])
Subsystem: ASRock Incorporation Device [1849:5513]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: SIS_IDE
Kernel modules: sis5513
00: 39 10 13 55 05 00 00 02 00 80 01 01 00 80 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 ff 00 00 00 00 00 00 00 00 00 00 49 18 13 55
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 06 00 00 00 00 00
50: f2 07 f2 07 aa 96 d5 c0 00 00 00 00 00 00 00 00
60: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
70: 17 21 06 04 00 00 00 00 56 23 06 04 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: ASRock Incorporation Device [1849:7012]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00: 39 10 12 70 05 01 90 02 a0 00 01 04 00 20 00 00
10: 01 dc 00 00 01 d8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 12 70
30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 03 34 0b
40: 04 00 00 00 00 00 00 00 01 00 42 c6 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 80 00
10: 00 d0 ff cf 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 50
40: 00 00 00 00 5c ac 01 00 3f 02 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 00 00
10: 00 e0 ff cf 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 50
40: 00 00 00 00 5c ac 01 00 3f 02 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00: 39 10 02 70 06 01 90 02 00 20 03 0c 00 20 00 00
10: 00 f0 ff cf 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 70
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 50
40: 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 c9 00 00 00 00 0a 00 00 21 00 00 00 00
60: 20 20 7f 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter [8086:000c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at cfffc000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d400 [size=64]
Region 2: Memory at cfe00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at cfd00000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: e100
00: 86 80 29 12 17 01 90 02 08 00 00 02 08 20 00 00
10: 00 c0 ff cf 01 d4 00 00 00 00 e0 cf 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 0c 00
30: 00 00 d0 cf dc 00 00 00 00 00 00 00 05 01 08 38
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe
e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: C.P. Technology Co. Ltd Device [148c:2081]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at b800 [size=256]
Region 2: Memory at cfaf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at cfac0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: radeonfb
00: 02 10 59 51 87 01 b0 02 00 00 00 03 08 20 00 00
10: 08 00 00 c0 01 b8 00 00 00 00 af cf 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 8c 14 81 20
30: 00 00 ac cf 58 00 00 00 00 00 00 00 0b 01 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 8c 14 81 20
50: 01 00 02 06 00 00 00 00 02 50 20 00 07 02 00 2f
60: 04 03 00 1f 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-------------- next part --------------
superiotool r3125
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0x50fe, id=0x1260
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0x6012, rev=0xf
Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Found Winbond W83697HF/F/HG (id=0x60, rev=0x12) at 0x2e
Register dump:
idx 07 20 21 22 23 24 25 26 28 29 2a
val 07 60 12 ff fe 50 00 00 00 00 ff
def NA 60 NA ff 00 00 00 00 00 00 MM
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2 f4 f5
val 01 03 f0 06 02 0e 00 ff 00 00
def 01 03 f0 06 02 0e 00 ff 00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 01 03 78 07 00 3b
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 00 00 00 00 00 00
def 01 02 f8 03 00 00
LDN 0x06 (Consumer IR)
idx 30 60 61 70
val 00 00 00 00
def 00 00 00 00
LDN 0x07 (Game port, GPIO 1)
idx 30 60 61 62 63 f0 f1 f2
val 01 02 00 00 00 ff 00 00
def 00 02 01 00 00 ff 00 00
LDN 0x08 (MIDI port, GPIO 5)
idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5
val 00 00 00 00 00 00 ff ff ff 00 00 00
def 00 03 30 00 00 09 ff 00 00 00 00 00
LDN 0x09 (GPIO 2, GPIO 3, GPIO 4)
idx 30 60 61 f0 f1 f2 f3 f4 f5 f6 f7 f8 f5
val 00 00 00 ff ff ff ff ff ff ff ff ff ff
def 00 00 00 ff 00 00 ff 00 00 ff 00 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9
val 00 00 20 ff ff 00 00 00 00 8f 0e 00 00 00 00
def 00 00 00 00 NA 00 00 00 00 00 00 00 00 00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70
val 01 02 90 00
def 00 00 00 00
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
-------------- next part --------------
flashrom v0.9.1-r758
No coreboot table found.
Found chipset "SiS SiS 746", enabling flash write... Found southbridge 1039:0963 at 00:02:0
tried to set register 0x45 to 0x40 on SiS 746 failed (WARNING ONLY)
Stuck at 0x0
Can not find SuperI/O.
FAILED!
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 641M loops per second, 100 myus = 161 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x72, id2 0xe6
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x5e, id2 0xa1, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: probe_jedec: id1 0x5e, id2 0xa1, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x64, id2 0xd0
Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x64, id2 0xd0
Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Intel 28F001BX-B, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BX-T, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x72, id2 0xe6
Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x72, id2 0xe6
Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x64, id2 0xd0
Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x64, id2 0xd0
Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xff, id2 0xff
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x64, id2 0xd0
Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x64, id2 0xd0
Probing for PMC Pm39LV010, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x5e, id2 0xa1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x64, id2 0xd0
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x72, id2 0xe6, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x64, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
More information about the flashrom
mailing list