[flashrom] ASUS A8V support

Aaron Smith list at soccergeek.net
Fri Oct 23 07:30:14 CEST 2009


Carl-Daniel Hailfinger wrote:
> Hi Aaron,
> 
> thanks for your report. It would be great if you could mail the output
> of "lspci -nnvvvxxx" and the output of "flashrom -V" to this list (hit
> "reply all" in your mailer). That will enable us to keep track of the
> exact board hardware and improve detection reliability for other boards.
> 

Here's the requested info.  Let me know if you need anything else.

% lspci -nnvvvxxx
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge 
[1106:0282]
         Subsystem: ASUSTeK Computer Inc. Device [1043:80a3]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
         Latency: 64
         Region 0: Memory at <ignored> (32-bit, prefetchable)
         Capabilities: <access denied>
         Kernel driver in use: agpgart-amd64
00: 06 11 82 02 06 01 30 22 00 00 00 06 00 40 80 00
10: 08 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a3 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge 
[1106:1282]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
00: 06 11 82 12 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge 
[1106:2282]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
00: 06 11 82 22 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge 
[1106:3282]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
00: 06 11 82 32 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge 
[1106:4282]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
00: 06 11 82 42 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge 
[1106:7282]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
00: 06 11 82 72 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge 
[K8T800/K8T890 South] [1106:b188]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
         I/O behind bridge: 0000f000-00000fff
         Memory behind bridge: faf00000-fbffffff
         Prefetchable memory behind bridge: f0000000-f9ffffff
         Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
         Capabilities: <access denied>
         Kernel modules: shpchp
00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 22
20: f0 fa f0 fb 00 f0 f0 f9 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0a 00

00:0a.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 
88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
         Subsystem: ASUSTeK Computer Inc. Device [1043:811a]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 17
         Region 0: Memory at fa900000 (32-bit, non-prefetchable) [size=16K]
         Region 1: I/O ports at 9400 [size=256]
         Expansion ROM at fa800000 [disabled] [size=128K]
         Capabilities: <access denied>
         Kernel driver in use: skge
         Kernel modules: skge
00: ab 11 20 43 17 01 b0 02 13 00 00 02 10 40 00 00
10: 00 00 90 fa 01 94 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1a 81
30: 00 00 80 fa 48 00 00 00 00 00 00 00 0a 01 17 1f

00:0c.0 FireWire (IEEE 1394) [0c00]: NEC Corporation uPD72874 IEEE1394 
OHCI 1.1 3-port PHY-Link Ctrlr [1033:00f2] (rev 01) (prog-if 10)
         Subsystem: NEC Corporation uPD72874 IEEE1394 OHCI 1.1 3-port 
PHY-Link Ctrlr [1033:00f2]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64 (5000ns min, 11000ns max), Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 17
         Region 0: Memory at faa00000 (32-bit, non-prefetchable) [size=4K]
         Capabilities: <access denied>
         Kernel driver in use: ohci1394
         Kernel modules: firewire-ohci, ohci1394
00: 33 10 f2 00 16 01 90 02 01 10 00 0c 10 40 00 00
10: 00 00 a0 fa 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 f2 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 14 2c

00:0e.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 
[SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
         Subsystem: Silicon Image, Inc. Device [1095:7114]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64, Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 19
         Region 0: I/O ports at b000 [size=8]
         Region 1: I/O ports at a800 [size=4]
         Region 2: I/O ports at a400 [size=8]
         Region 3: I/O ports at a000 [size=4]
         Region 4: I/O ports at 9800 [size=16]
         Region 5: Memory at fac00000 (32-bit, non-prefetchable) [size=1K]
         Expansion ROM at fab00000 [disabled] [size=512K]
         Capabilities: <access denied>
         Kernel driver in use: sata_sil
00: 95 10 14 31 07 01 b0 02 02 00 04 01 10 40 00 00
10: 01 b0 00 00 01 a8 00 00 01 a4 00 00 01 a0 00 00
20: 01 98 00 00 00 00 c0 fa 00 00 00 00 95 10 14 71
30: 00 00 b0 fa 60 00 00 00 00 00 00 00 03 01 00 00

00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 
SATA RAID Controller [1106:3149] (rev 80)
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64
         Interrupt: pin B routed to IRQ 20
         Region 0: I/O ports at d000 [size=8]
         Region 1: I/O ports at c800 [size=4]
         Region 2: I/O ports at c400 [size=8]
         Region 3: I/O ports at c000 [size=4]
         Region 4: I/O ports at b800 [size=16]
         Region 5: I/O ports at b400 [size=256]
         Capabilities: <access denied>
         Kernel driver in use: sata_via
         Kernel modules: sata_via
00: 06 11 49 31 07 00 90 02 80 00 04 01 00 40 80 00
10: 01 d0 00 00 01 c8 00 00 01 c4 00 00 01 c0 00 00
20: 01 b8 00 00 01 b4 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 02 00 00

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 
06) (prog-if 8a [Master SecP PriP])
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 32
         Interrupt: pin A routed to IRQ 20
         Region 0: [virtual] Memory at 000001f0 (32-bit, 
non-prefetchable) [size=8]
         Region 1: [virtual] Memory at 000003f0 (type 3, 
non-prefetchable) [size=1]
         Region 2: [virtual] Memory at 00000170 (32-bit, 
non-prefetchable) [size=8]
         Region 3: [virtual] Memory at 00000370 (type 3, 
non-prefetchable) [size=1]
         Region 4: I/O ports at fc00 [size=16]
         Capabilities: <access denied>
         Kernel driver in use: pata_via
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller [1106:3038] (rev 81)
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64, Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 21
         Region 4: I/O ports at d400 [size=32]
         Capabilities: <access denied>
         Kernel driver in use: uhci_hcd
00: 06 11 38 30 17 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller [1106:3038] (rev 81)
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64, Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 21
         Region 4: I/O ports at d800 [size=32]
         Capabilities: <access denied>
         Kernel driver in use: uhci_hcd
00: 06 11 38 30 17 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller [1106:3038] (rev 81)
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64, Cache Line Size: 64 bytes
         Interrupt: pin B routed to IRQ 21
         Region 4: I/O ports at e000 [size=32]
         Capabilities: <access denied>
         Kernel driver in use: uhci_hcd
00: 06 11 38 30 17 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller [1106:3038] (rev 81)
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64, Cache Line Size: 64 bytes
         Interrupt: pin B routed to IRQ 21
         Region 4: I/O ports at e400 [size=32]
         Capabilities: <access denied>
         Kernel driver in use: uhci_hcd
00: 06 11 38 30 17 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 
[1106:3104] (rev 86) (prog-if 20)
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64, Cache Line Size: 64 bytes
         Interrupt: pin C routed to IRQ 21
         Region 0: Memory at fae00000 (32-bit, non-prefetchable) [size=256]
         Capabilities: <access denied>
         Kernel driver in use: ehci_hcd
00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00
10: 00 00 e0 fa 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge 
[KT600/K8T800/K8T890 South] [1106:3227]
         Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
         Capabilities: <access denied>
         Kernel modules: i2c-viapro
00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. 
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
         Subsystem: ASUSTeK Computer Inc. Device [1043:812a]
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Interrupt: pin C routed to IRQ 22
         Region 0: I/O ports at e800 [size=256]
         Capabilities: <access denied>
         Kernel driver in use: VIA 82xx Audio
         Kernel modules: snd-via82xx
00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2a 81
30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 03 00 00

00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 
Modem Controller [1106:3068] (rev 80)
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Interrupt: pin C routed to IRQ 22
         Region 0: I/O ports at 1000 [size=256]
         Capabilities: <access denied>
         Kernel modules: snd-via82xx-modem
00: 06 11 68 30 01 00 10 02 80 00 80 07 00 00 00 00
10: 01 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 03 00 00

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Capabilities: <access denied>
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] Address Map [1022:1101]
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] DRAM Controller [1022:1102]
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Kernel driver in use: amd64_edac
         Kernel modules: amd64_edac_mod
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Kernel driver in use: k8temp
         Kernel modules: k8temp
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18 
[GeForce4 MX 4000] [10de:0185] (rev c1)
         Subsystem: ASUSTeK Computer Inc. Device [1043:8193]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64 (1250ns min, 250ns max)
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
         Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
         Expansion ROM at faf00000 [disabled] [size=128K]
         Capabilities: <access denied>
         Kernel modules: nvidiafb
00: de 10 85 01 07 00 b0 02 c1 00 00 03 00 40 00 00
10: 00 00 00 fb 08 00 00 f0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 93 81
30: 00 00 f0 fa 60 00 00 00 00 00 00 00 0b 01 05 01

% sudo flashrom -V
flashrom v0.9.1-r706
No coreboot table found.
Found chipset "VIA VT8237", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 645M loops per second, 100 myus = 191 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x50, id2 0x00
Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type 
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x00, id2 0x00
Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x00, id2 0x00
Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000.
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip 
bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x00, id2 0x00
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and 
chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond 
W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky 
state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x9d, id2 0x6e
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, 
id2 0xff
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: 
id1 0x9d, id2 0x6e
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type 
Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type 
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus 
type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type 
Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type 
Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI 
and chip bus type SPI are incompatible.
No operations were specified.


@@ron




More information about the flashrom mailing list