[flashrom] [Patch] Shuttle AK31

[Carl-Daniel Hailfinger]

Updated patch because the board enable table changed too much. No code
changes, so I'm reusing the original commit message and acks.

Board enable for Shuttle AK31.

All AK31 versions, 1.x, 2.x and 3.x are supported by this board enable.
Sadly this board can not be autodetected.

Re-uses the epox ep 8k5a2 board enable, which now lost its check for
the VT8235 ISA bridge and got renamed to w836xx_memw_enable_2e.

Signed-off-by: Luc Verhaegen <libv at skynet.be>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Stefan Reinauer <stepan at coresystems.de>

Index: flashrom-shuttle_ak31/board_enable.c
===================================================================
--- flashrom-shuttle_ak31/board_enable.c	(Revision 753)
+++ flashrom-shuttle_ak31/board_enable.c	(Arbeitskopie)
@@ -297,18 +297,13 @@
 }
 
 /**
- * Suited for EPoX EP-8K5A2 and Albatron PM266A Pro.
+ * Suited for:
+ *   - EPoX EP-8K5A2: VIA KT333 + VT8235.
+ *   - Albatron PM266A Pro: VIA P4M266A + VT8235.
+ *   - Shuttle AK31 (all versions): VIA KT266 + VT8233.
  */
-static int board_epox_ep_8k5a2(const char *name)
+static int w836xx_memw_enable_2e(const char *name)
 {
-	struct pci_dev *dev;
-
-	dev = pci_dev_find(0x1106, 0x3177);	/* VT8235 ISA bridge */
-	if (!dev) {
-		fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n");
-		return -1;
-	}
-
 	w836xx_memw_enable(0x2E);
 
 	return 0;
@@ -1066,7 +1061,7 @@
 	{0x8086, 0x2926, 0x147b, 0x1084,  0x11ab, 0x4364, 0x147b, 0x1084, NULL,         NULL,          "Abit",        "IP35",               board_abit_ip35},
 	{0x8086, 0x1130,      0,      0,  0x105a, 0x0d30, 0x105a, 0x4d33, "acorp",      "6a815epd",    "Acorp",       "6A815EPD",           board_acorp_6a815epd},
 	{0x1022, 0x746B, 0x1022, 0x36C0,       0,      0,      0,      0, "AGAMI",      "ARUMA",       "agami",       "Aruma",              w83627hf_gpio24_raise_2e},
-	{0x1106, 0x3177, 0x17F2, 0x3177,  0x1106, 0x3148, 0x17F2, 0x3148, NULL,         NULL,          "Albatron",    "PM266A*",            board_epox_ep_8k5a2},
+	{0x1106, 0x3177, 0x17F2, 0x3177,  0x1106, 0x3148, 0x17F2, 0x3148, NULL,         NULL,          "Albatron",    "PM266A*",            w836xx_memw_enable_2e},
 	{0x1106, 0x3205, 0x1106, 0x3205,  0x10EC, 0x8139, 0xA0A0, 0x0477, NULL,         NULL,          "AOpen",       "vKM400Am-S",         board_aopen_vkm400},
 	{0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, "artecgroup", "dbe61",       "Artec Group", "DBE61",              board_artecgroup_dbe6x},
 	{0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, "artecgroup", "dbe62",       "Artec Group", "DBE62",              board_artecgroup_dbe6x},
@@ -1080,7 +1075,7 @@
 	{0x1106, 0x3149, 0x1565, 0x3206,  0x1106, 0x3344, 0x1565, 0x1202, NULL,         NULL,          "Biostar",     "P4M80-M4",           it8705_rom_write_enable},
 	{0x8086, 0x3590, 0x1028, 0x016c,  0x1000, 0x0030, 0x1028, 0x016c, NULL,         NULL,          "Dell",        "PowerEdge 1850",     ich5_gpio23_raise},
 	{0x1106, 0x3038, 0x1019, 0x0996,  0x1106, 0x3177, 0x1019, 0x0996, NULL,         NULL,          "Elitegroup",  "K7VTA3",             it8705f_write_enable_2e},
-	{0x1106, 0x3177, 0x1106, 0x3177,  0x1106, 0x3059, 0x1695, 0x3005, NULL,         NULL,          "EPoX",        "EP-8K5A2",           board_epox_ep_8k5a2},
+	{0x1106, 0x3177, 0x1106, 0x3177,  0x1106, 0x3059, 0x1695, 0x3005, NULL,         NULL,          "EPoX",        "EP-8K5A2",           w836xx_memw_enable_2e},
 	{0x10EC, 0x8139, 0x1695, 0x9001,  0x11C1, 0x5811, 0x1695, 0x9015, NULL,         NULL,          "EPoX",        "EP-8RDA3+",          board_epox_ep_8rda3plus},
 	{0x8086, 0x7110,      0,      0,  0x8086, 0x7190,      0,      0, "epox",       "ep-bx3",      "EPoX",        "EP-BX3",             board_epox_ep_bx3},
 	{0x1039, 0x0761,      0,      0,       0,      0,      0,      0, "gigabyte",   "2761gxdk",    "GIGABYTE",    "GA-2761GXDK",        it87xx_probe_spi_flash},
@@ -1105,6 +1100,7 @@
 	{0x1106, 0x0571, 0x1462, 0x7120,       0,      0,      0,      0, "msi",        "kt4v",        "MSI",         "MS-6712 (KT4V)",     board_msi_kt4v},
 	{0x8086, 0x2658, 0x1462, 0x7046,  0x1106, 0x3044, 0x1462, 0x046d, NULL,         NULL,          "MSI",         "MS-7046",            ich6_gpio19_raise},
 	{0x10de, 0x005e,      0,      0,       0,      0,      0,      0, "msi",        "k8n-neo3",    "MSI",         "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e},
+	{0x1106, 0x3099,      0,      0,  0x1106, 0x3074,      0,      0, "shuttle",    "ak31",        "Shuttle",     "AK31",               w836xx_memw_enable_2e},
 	{0x1106, 0x3104, 0x1297, 0xa238,  0x1106, 0x3059, 0x1297, 0xc063, NULL,         NULL,          "Shuttle",     "AK38N",              it8705f_write_enable_2e},
 	{0x10DE, 0x0050, 0x1297, 0x5036,  0x1412, 0x1724, 0x1297, 0x5036, NULL,         NULL,          "Shuttle",     "FN25",               board_shuttle_fn25},
 	{0x1106, 0x3038, 0x0925, 0x1234,  0x1106, 0x3058, 0x15DD, 0x7609, NULL,         NULL,          "Soyo",        "SY-7VCA",            board_soyo_sy_7vca},


-- 
Developer quote of the week: 
"We are juggling too many chainsaws and flaming arrows and tigers."