[flashrom] [PATCH] Add Winbond W25Qxx

David Hendricks dhendrix at google.com
Tue Apr 20 21:41:54 CEST 2010


On Tue, Apr 20, 2010 at 12:38 PM, Rudolf Marek <r.marek at assembler.cz> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hmm I just tried on VT8237S and I got
> Found chip "Winbond W25Q80" (1024 KB, SPI) at physical address 0xfff00000.
> ===
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> Please email a report to flashrom at flashrom.org if any of the above
> operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V,
> -rV,
> - -wV, -EV), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> Writing flash chip... Erasing flash before programming... Erasing flash
> chip...
> spi_block_erase_20 failed during command execution at address 0x0
> spi_block_erase_52 failed during command execution at address 0x0
> SUCCESS.
> done.
> Programming page:
> COMPLETE.
> Verifying flash... VERIFIED.
>
> So either I did some mistake or something else is wrong ;)
>

I'm pretty sure it's a chipset thing. Thanks for the patch!

-- 
David Hendricks (dhendrix)
Systems Software Engineer, Google Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100420/31b1d36d/attachment.html>


More information about the flashrom mailing list