[flashrom] [PATCH] Board enable for Asus P4S800-MX

[David Borg]

> If you just have one subsystem ID, DMI might be a good idea. I suggested
> not to use the IDE controller for the second subsystem ID, as it varies
> with AHCI/RAID/whatsoever modes, but this board is so old, it has
> nothing of them. I suggest to use the IDE PCI ID with subsystem as
> second device and drop the DMI.

Yes in fact the only settings you can change in the bios are related
to UDMA modes and such.
And btw, I was wrong on iRC - all USB controllers can be disabled.

Attached patch updated as suggested & tested.

Regards,
David Borg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: board_enable_P4S800-MX.patch
Type: text/x-patch
Size: 1717 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100801/05fac3ac/attachment.patch>