[flashrom] GIGABYTE GA-8I945GZME-RH, needs board-enable and maybe more?

[Carl-Daniel Hailfinger]

Hi Uwe,

On 25.08.2010 15:27, Uwe Hermann wrote:
> here's the info for the GIGABYTE GA-8I945GZME-RH, doesn't seem to work
> with flashrom yet, logs below.
>   

Thanks for the logs.

> flashrom v0.9.2-r1145 on Linux 2.6.25-2-686 (i686), built with libpci 3.1.2, GCC 4.2.4 (Debian 4.2.4-6), little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OK.
> Found chipset "Intel ICH7/ICH7R", enabling flash write... OK.
> This chipset supports the following protocols: SPI.
> Found chip "SST SST25VF040.REMS" (512 KB, SPI) at physical address 0xfff80000.
> Flash image seems to be a legacy BIOS. Disabling checks.
> Writing flash chip... Erasing flash before programming... Erasing flash chip... spi_block_erase_20 failed during command execution at address 0x0
> spi_block_erase_52 failed during command execution at address 0x0
> spi_chip_erase_60 failed during command execution

Looks like we need to merge the ICH SPI dynamic reprogramming patch by
Helge Wagner. I'll try to review it later this week.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/