[flashrom] Support for HP Compaq 6820s laptop
apricot053 at gmail.com
apricot053 at gmail.com
Sat Jul 10 02:18:52 CEST 2010
Hello,
Just messed up a little bit with the code. Seems that the whole region f0000-
fffff is write-protected. No idea what is actually stored in it and why it is
write-protected apart it being rewritten by the HP flash utility when upgrading
(but not when downgrading). So didn't find out anything, sad :|
Best regards,
Julius
-- Ursprüngliche Nachricht:
Betreff: Support for HP Compaq 6820s laptop
Datum: Freitag, 9. Juli 2010, 13:59:28
Von: Jean Dupont <apricot053 at googlemail.com>
An: flashrom at flashrom.org
> Hello,
>
>
>
> I just tried flashrom with my laptop:
> model: HP Compaq 6820s
> s/n: CNU74829VJ
> p/n: GR713ET#ABF
> service tag: C6820sST7250F7x16GIBN20Ca FR
> no idea how to find the revision number,
> but here some numbers lying around: HPK-HSTNN-I40C(B)
>
> here a link to some bios versions:
>
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3442856&swItem=ob-62357-1&prodNameId=3442857&swEnvOID=1093&swLang=24&taskId=135&mode=5
>
>
> my current experience when flashing a new rom file is that flashrom
> tries to erase before writing, cannot erase the block beginning at
> F0000 because it's write-protected and exits. carldani on irc just
> helped me to recover.
>
> I suppose that there is some region, say F0000-FFEFF which is
> write-protected. it would be great if we could specify to flashrom to
> skip it and flash 00000-EFFFF and FFF00-FFFFF only. There is only
> zeros when you read the write-protected region anyway.
>
>
>
> Thank you very much. This is a great project :)
> Julius.
>
>
>
>
> P.S.: here some debug info:
>
> output of flashrom -V:
> root at ubuntu:~/Dokumente/vrac# flashrom -V
> flashrom v0.9.1-r946
> No coreboot table found.
> DMI string system-manufacturer: "Hewlett-Packard"
> DMI string system-product-name: "HP Compaq 6820s"
> DMI string system-version: "F.0B"
> DMI string baseboard-manufacturer: "Hewlett-Packard"
> DMI string baseboard-product-name: "30D7"
> DMI string baseboard-version: "KBC Version 83.13"
> DMI string chassis-type: "Notebook"
> Laptop detected via DMI
> ========================================================================
> WARNING! You seem to be running flashrom on a laptop.
> Laptops, notebooks and netbooks are difficult to support and we recommend
> to use the vendor flashing utility. The embedded controller (EC) in these
> machines often interacts badly with flashing.
> See http://www.flashrom.org/Laptops for details.
> ========================================================================
> Found chipset "Intel ICH8M", enabling flash write...
> 0xfff80000/0xffb80000 FWH IDSEL: 0x0
> 0xfff00000/0xffb00000 FWH IDSEL: 0x0
> 0xffe80000/0xffa80000 FWH IDSEL: 0x1
> 0xffe00000/0xffa00000 FWH IDSEL: 0x1
> 0xffd80000/0xff980000 FWH IDSEL: 0x2
> 0xffd00000/0xff900000 FWH IDSEL: 0x2
> 0xffc80000/0xff880000 FWH IDSEL: 0x3
> 0xffc00000/0xff800000 FWH IDSEL: 0x3
> 0xff700000/0xff300000 FWH IDSEL: 0x4
> 0xff600000/0xff200000 FWH IDSEL: 0x5
> 0xff500000/0xff100000 FWH IDSEL: 0x6
> 0xff400000/0xff000000 FWH IDSEL: 0x7
> 0xfff80000/0xffb80000 FWH decode enabled
> 0xfff00000/0xffb00000 FWH decode enabled
> 0xffe80000/0xffa80000 FWH decode disabled
> 0xffe00000/0xffa00000 FWH decode disabled
> 0xffd80000/0xff980000 FWH decode disabled
> 0xffd00000/0xff900000 FWH decode disabled
> 0xffc80000/0xff880000 FWH decode disabled
> 0xffc00000/0xff800000 FWH decode disabled
> 0xff700000/0xff300000 FWH decode disabled
> 0xff600000/0xff200000 FWH decode disabled
> 0xff500000/0xff100000 FWH decode disabled
> 0xff400000/0xff000000 FWH decode disabled
> Maximum FWH chip size: 0x100000 bytes
> BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
>
> Root Complex Register Block address = 0xfed90000
> GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
> Top Swap : not enabled
> SPIBAR = 0xfed90000 + 0x3020
> 0x04: 0xe008 (HSFS)
> FLOCKDN 1, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
> 0x50: 0x0000ffff (FRAP)
> BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
> 0x54: 0x00000000 (FREG0)
> 0x58: 0x00ff0003 (FREG1)
> 0x5C: 0x00000fff (FREG2)
> 0x60: 0x00020001 (FREG3)
> 0x64: 0x00000000 (FREG4)
> 0x74: 0x80ff00f0 (PR0)
> 0x78: 0x00000000 (PR1)
> 0x7C: 0x00000000 (PR2)
> 0x80: 0x00000000 (PR3)
> 0x84: 0x00000000 (PR4)
> 0x90: 0x00420004 (SSFS, SSFC)
> 0x94: 0x5006 (PREOP)
> 0x96: 0x7f48 (OPTYPE)
> 0x98: 0x0405039f (OPMENU)
> 0x9C: 0x0102d820 (OPMENU+4)
> 0xA0: 0x00000000 (BBAR)
> 0xB0: 0x00000000 (FDOC)
> WARNING: SPI Configuration Lockdown activated.
> Generating OPCODES... done
> SPI Read Configuration: prefetching disabled, caching enabled, OK.
> This chipset supports the following protocols: FWH,SPI.
> Calibrating delay loop... 609M loops per second, 100 myus = 196 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Chip status register is 00
> Chip status register: Status Register Write Disable (SRWD) is not set
> Chip status register: Bit 6 is not set
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
> Chip status register: Write Enable Latch (WEL) is not set
> Chip status register: Write In Progress (WIP/BUSY) is not set
> Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address
0xfff00000.
> Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20
> 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20
> 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20
> 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x02, id2
> 0x37, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90
> Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90
> Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x02,
> id2 0x37, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than
> supported size 1024 kB of chipset/board/programmer for FWH interface,
> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than
> supported size 1024 kB of chipset/board/programmer for FWH interface,
> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x02,
> id2 0x37, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
> timing information, using default 10mS/40uS. probe_jedec_common: id1
> 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
> is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
> probe timing information, using default 10mS/40uS. probe_jedec_common:
> id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash
> content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping
> flash chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero
> size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> Invalid OPCODE 0x90
> Not unmapping zero size at (nil)
> ===
> This flash part has status UNTESTED for operations: ERASE
> Please email a report to flashrom at flashrom.org if any of the above operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -rV,
> -wV, -EV), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> No operations were specified.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> output of lspci -nnvvvxxx:
> root at ubuntu:~/Dokumente/vrac# lspci -nnvvvxxx
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
> Memory Controller Hub [8086:2a00] (rev 0c)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information <?>
> Kernel modules: intel-agp
> 00: 86 80 00 2a 06 00 90 20 0c 00 00 06 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 90 d9 fe 00 00 00 00 01 40 d9 fe 00 00 00 00
> 50: 00 00 02 00 13 03 00 00 00 00 00 00 00 00 00 00
> 60: 05 00 00 f8 00 00 00 00 01 80 d9 fe 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 01 10 00 00 00 00 00 00
> 80: 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 10 11 11 00 00 13 11 00 ff 03 00 00 00 1a b8 00
> a0: 10 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
> e0: 09 00 0a 91 a2 7c 00 30 04 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 90 0f 04 00 10 00 00 00
>
> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960
> PCI Express Root Port [8086:2a01] (rev 0c)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: dc400000-dc4fffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [88] Subsystem: Hewlett-Packard Company Device
[103c:30d7]
> Capabilities: [80] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
> Address: fee0300c Data: 4159
> Capabilities: [a0] Express (v1) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <256ns, L1 <4us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [140] Root Complex Link <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 86 80 01 2a 07 04 10 00 0c 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 00 40 40 00 20
> 20: 40 dc 40 dc 01 d0 f1 d7 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 1c 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 90 03 c8 00 00 00 00 0d 80 00 00 3c 10 d7 30
> 90: 05 a0 01 00 0c 30 e0 fe 59 41 00 00 00 00 00 00
> a0: 10 00 41 00 00 80 00 00 00 00 01 00 01 2d 01 02
> b0: 43 00 01 11 c0 25 0c 00 c0 01 48 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 20 00 01 84 0c 00 00 a0 90 0f 04 00 31 00 00 00
>
> 00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100
> Network Connection [8086:10c4] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 28
> Region 0: Memory at dc500000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at dc520000 (32-bit, non-prefetchable) [size=4K]
> Region 2: I/O ports at 5000 [size=32]
> Capabilities: [c8] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable+
> Address: 00000000fee0200c Data: 41c1
> Kernel driver in use: e1000e
> Kernel modules: e1000e
> 00: 86 80 c4 10 07 04 10 00 03 00 00 02 00 00 00 00
> 10: 00 00 50 dc 00 00 52 dc 01 50 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 c8 00 00 00 00 00 00 00 05 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 04
> d0: 05 00 81 00 0c 20 e0 fe 00 00 00 00 c1 41 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #4 [8086:2834] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at 5020 [size=32]
> Kernel driver in use: uhci_hcd
> 00: 86 80 34 28 05 00 80 02 03 00 03 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 21 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #5 [8086:2835] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at 5040 [size=32]
> Kernel driver in use: uhci_hcd
> 00: 86 80 35 28 05 00 80 02 03 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at dc521000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci_hcd
> 00: 86 80 3a 28 06 00 90 02 03 20 03 0c 00 00 00 00
> 10: 00 10 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 03 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
> 60: 20 20 e1 01 00 00 00 00 01 00 00 00 00 00 08 c0
> 70: 00 00 c7 03 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 88 85 40 00 86 0f 05 00 0a 17 02 20
>
> 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
> Audio Controller [8086:284b] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at dc524000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM
> unknown, Latency L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [130] Root Complex Link <?>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
> 00: 86 80 4b 28 06 00 10 00 03 00 03 04 10 00 00 00
> 10: 04 40 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 01 00 00 03 00 00 00 00 00 00 00 00 00 80 00 00
> 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 10 00 91 00 c0 0f 00 00 00 08 10 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 1 [8086:283f] (rev 03)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
> Address: fee0300c Data: 4161
> Capabilities: [90] Subsystem: Hewlett-Packard Company Device
[103c:30d7]
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [180] Root Complex Link <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 86 80 3f 28 07 04 10 00 03 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 20
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
> 40: 10 80 41 00 c0 8f 00 00 00 00 10 00 11 4c 11 01
> 50: 00 00 01 10 60 05 10 00 00 00 40 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 90 01 00 0c 30 e0 fe 61 41 00 00 00 00 00 00
> 90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
> e0: 00 0f c7 00 06 07 08 00 31 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 2 [8086:2841] (rev 03)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
> I/O behind bridge: 00006000-00006fff
> Memory behind bridge: dc000000-dc0fffff
> Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <256ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surpise+
> Slot # 2, PowerLimit 0.160000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
> CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
> Address: fee0300c Data: 4169
> Capabilities: [90] Subsystem: Hewlett-Packard Company Device
[103c:30d7]
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [180] Root Complex Link <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 86 80 41 28 07 04 10 00 03 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 10 10 00 60 60 00 00
> 20: 00 dc 00 dc 01 80 11 80 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00
> 40: 10 80 41 01 c0 8f 00 00 00 00 10 00 11 2c 11 02
> 50: 40 00 11 30 60 08 11 00 00 00 40 01 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 90 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00
> 90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 11 88 00 00 00 00
> e0: 00 0f c7 84 06 07 08 00 31 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 5 [8086:2847] (rev 03)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
> I/O behind bridge: 00002000-00003fff
> Memory behind bridge: d8000000-dbffffff
> Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surpise+
> Slot # 5, PowerLimit 0.160000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+
> CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
> Address: fee0300c Data: 4171
> Capabilities: [90] Subsystem: Hewlett-Packard Company Device
[103c:30d7]
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [180] Root Complex Link <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 86 80 47 28 07 04 10 00 03 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 28 28 00 20 30 00 00
> 20: 00 d8 f0 db 21 80 31 80 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
> 40: 10 80 41 01 c0 8f 00 00 00 00 10 00 11 4c 11 05
> 50: 00 00 01 10 60 08 29 00 09 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 90 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00
> 90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 11 c8 00 00 00 00
> e0: 00 0f c7 00 06 07 08 00 31 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #1 [8086:2830] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 20
> Region 4: I/O ports at 5060 [size=32]
> Kernel driver in use: uhci_hcd
> 00: 86 80 30 28 05 00 80 02 03 00 03 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 61 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #2 [8086:2831] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at 5080 [size=32]
> Kernel driver in use: uhci_hcd
> 00: 86 80 31 28 05 00 80 02 03 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #3 [8086:2832] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at 50a0 [size=32]
> Kernel driver in use: uhci_hcd
> 00: 86 80 32 28 05 00 80 02 03 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: a1 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at dc528000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci_hcd
> 00: 86 80 36 28 06 00 90 02 03 20 03 0c 00 00 00 00
> 10: 00 80 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
> 60: 20 20 9f 01 00 00 00 00 01 00 00 00 00 00 08 c0
> 70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 88 85 40 00 86 0f 05 00 0a 17 02 20
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> [8086:2448] (rev f3) (prog-if 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Subsystem: Hewlett-Packard Company Device
[103c:30d7]
> 00: 86 80 48 24 07 01 10 00 f3 01 04 06 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 02 20 f0 00 80 22
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00
> 50: 0d 00 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC
> Interface Controller [8086:2815] (rev 03)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information <?>
> Kernel modules: iTCO_wdt
> 00: 86 80 15 28 07 00 10 02 03 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 10 00 00 80 00 00 00 01 11 00 00 10 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 80 80 80 80 92 00 00 00 80 80 80 80 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 00 3c 01 05 7c 00 00 00 00 00 00 00 00 00
> 90: e9 02 04 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 24 0e 00 00 e1 00 03 00 01 1c 0b 00 00 03 00 00
> b0: 00 00 f0 00 00 00 00 00 04 a0 62 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 33 22 11 00 67 45 00 00 00 c0 00 00 01 00 00 00
> e0: 09 00 0c 10 20 02 4c c3 60 00 00 00 00 00 00 00
> f0: 01 00 d9 fe 0c 69 22 00 86 0f 05 00 00 00 00 00
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM
> (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a
> [Master SecP PriP])
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 50c0 [size=16]
> Kernel driver in use: ata_piix
> 00: 86 80 50 28 05 00 80 02 03 8a 01 01 00 00 00 00
> 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
> 20: c1 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> 40: 03 e3 00 40 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM
> (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 30
> Region 0: I/O ports at 13f0 [size=8]
> Region 1: I/O ports at 15f4 [size=4]
> Region 2: I/O ports at 1370 [size=8]
> Region 3: I/O ports at 1574 [size=4]
> Region 4: I/O ports at 5100 [size=32]
> Region 5: Memory at dc529000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/2 Enable+
> Address: fee0100c Data: 41a9
> Capabilities: [70] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [a8] SATA HBA <?>
> Kernel driver in use: ahci
> Kernel modules: ahci
> 00: 86 80 29 28 07 04 b0 02 03 01 06 01 00 00 00 00
> 10: f1 13 00 00 f5 15 00 00 71 13 00 00 75 15 00 00
> 20: 01 51 00 00 00 90 52 dc 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
> 40: 07 a3 00 80 00 00 00 00 01 00 01 00 00 00 00 00
> 50: 00 00 00 00 11 10 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 70 05 00 0c 10 e0 fe a9 41 00 00 00 00 00 00
> 90: 40 00 03 01 80 01 00 7e 00 00 00 00 0c 00 00 00
> a0: 00 00 00 00 00 00 00 00 12 00 10 00 48 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV516
> [Mobility Radeon X1350] [1002:7196]
> Subsystem: Hewlett-Packard Company Device [103c:30d7]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 29
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 4000 [size=256]
> Region 2: Memory at dc400000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at dc420000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable+
> Address: 00000000fee0200c Data: 41a1
> Kernel driver in use: radeon
> Kernel modules: radeon
> 00: 02 10 96 71 07 04 10 00 00 00 00 03 10 00 00 00
> 10: 08 00 00 d0 01 40 00 00 00 00 40 dc 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 50: 01 58 02 06 00 00 00 00 10 80 11 00 a0 0f 2c 01
> 60: 10 08 00 00 01 0d 00 00 43 00 01 11 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 00 81 00 0c 20 e0 fe 00 00 00 00 a1 41 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
> 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
> Subsystem: Hewlett-Packard Company Device [103c:135c]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [c8] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable+
> Address: 00000000fee0300c Data: 41b1
> Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <128ns, L1 <64us
> ClockPM+ Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Device Serial Number 5a-e1-58-ff-ff-bf-1c-00
> Kernel driver in use: iwl3945
> Kernel modules: iwl3945
> 00: 86 80 22 42 06 04 10 00 02 00 80 02 10 00 00 00
> 10: 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 5c 13
> 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 00 00 0d
> d0: 05 e0 81 00 0c 30 e0 fe 00 00 00 00 b1 41 00 00
> e0: 10 00 11 00 c0 0e 00 00 10 08 10 00 11 1c 07 00
> f0: 40 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> output of superiotool -deV:
> root at ubuntu:~/Dokumente/vrac# superiotool -deV
> superiotool r3844
> Probing for ALi Super I/O at 0x3f0...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for ALi Super I/O at 0x370...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
> Failed. Returned data: vid=0x8400, id=0x0036
> Probing for Fintek Super I/O at 0x4e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
> Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
> Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
> Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=standard) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Failed. Returned data: id=0x36, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> No Super I/O found
>
More information about the flashrom
mailing list