[flashrom] flashrom on ASUS P4BP-MX 2.00

[Anton Yuzhaninov]

1. Read seems to work:

$ flashrom -r ttt.bin
flashrom v0.9.2-r1001 on FreeBSD 9.0-CURRENT (i386), built with libpci
3.1.7, GCC 4.2.1 20070719  [FreeBSD]
flashrom is free software, get the source code at
http://www.flashrom.org

No coreboot table found.
Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... OK.
Found chip "SST SST49LF003A/B" (384 KB, FWH) at physical address
0xfffa0000.
===
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest
development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V,
-Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Reading flash... done.

$  ls -l ttt.bin
-rw-r--r--  1 root  citrin  393216 Jun  9 20:48 ttt.bin

full read log with -V:
http://citrin.ru/tmp/flashrom_ASUS_P4BP-MX_read.log

2. Write don't work:

===
Flash image seems to be a legacy BIOS. Disabling checks.
Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00000000!
Expected=0xff, Read=0x24, failed byte count from 0x00000000-0x00000fff:
0xfef
ERASE FAILED!
ERASE FAILED at 0x00000000! Expected=0xff, Read=0x24, failed byte count
from 0x00000000-0x0000ffff: 0xfeec
ERASE FAILED!
FAILED!
ERASE FAILED!
FAILED!
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org!

full write log:
http://citrin.ru/tmp/flashrom_ASUS_P4BP-MX_write.log

3. after failed write flash seems to be not corrupted: md5 for file from
flashrom -r is same as before.

-- 
WBR,
 Anton Yuzhaninov