[flashrom] [PATCH] Don't ignore wait_82802ab() return value

[Michael Karcher]

Am Freitag, den 14.05.2010, 14:48 +0200 schrieb Stefan Reinauer:
> On 4/16/10 6:21 PM, Stefan Reinauer wrote:
> > Look at the return value of wait_82802ab()
> > Index: sst49lfxxxc.c
> > ===================================================================
> > --- sst49lfxxxc.c	(revision 993)
> > +++ sst49lfxxxc.c	(working copy)
> > @@ -84,6 +84,7 @@
> >  	chip_writeb(0xD0, bios + address);
> >  
> >  	status = wait_82802ab(bios);
> > +	print_status_82802ab(status);
[...]
basically a good idea, but printing one status dump per erased block
seems a bit excessive, even in verbose mode, as there are some chips
with 4K sector size. Could you limit status printing to "status !=
0x80", as this is "ready, no error bits"?

Regards,
  Michael Karcher