[flashrom] My Success Story
Hering
boerni at pakke.de
Sat May 29 02:22:43 CEST 2010
hello, i updated the Bios of my Motherboard
Brand: Gigabyte GA-770TA-UD3
update from F3C to F3
Gentoo Linux
www.sysprofile.de/id31679
1.
boerni-workstation loop # /usr/local/sbin/flashrom -w 770TAUD3.F3
2.
flashrom v0.9.2-r1017 on Linux 2.6.34 (x86_64), built with libpci
3.1.4, GCC 4.4.3, little endian
3.
flashrom is free software, get the source code at
http://www.flashrom.org
4.
5.
Calibrating delay loop... OK.
6.
No coreboot table found.
7.
Found ITE Super I/O, id 8720
8.
Found chipset "AMD SB700/SB710/SB750", enabling flash write... OK.
9.
This chipset supports the following protocols: LPC,FWH,SPI.
10.
Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address
0xfff00000.
11.
===
12.
This flash part has status UNTESTED for operations: ERASE
13.
The test status of this chip may have been updated in the latest
development
14.
version of flashrom. If you are running the latest development
version,
15.
please email a report to flashrom at flashrom.org if any of the above
operations
16.
work correctly for you with this flash part. Please include the
flashrom
17.
output with the additional -V option for all operations you tested
(-V, -Vr,
18.
-Vw, -VE), and mention which mainboard or programmer you tested.
19.
Thanks for your help!
20.
===
21.
Flash image seems to be a legacy BIOS. Disabling checks.
22.
Writing flash chip... Erasing flash before programming... Erasing
flash chip... SUCCESS.
23.
done.
24.
Programming flash done.
25.
COMPLETE.
26.
Verifying flash... VERIFIED.
27.
boerni-workstation loop #
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100529/a0b84744/attachment.html>
More information about the flashrom
mailing list