[flashrom] Asus P4P800-VM

Mosse thykka at gmail.com
Sat Sep 4 15:44:13 CEST 2010


root at bismuth:/home/thykka# flashrom -V
flashrom v0.9.1-r946
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M. by More String"
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P4P800-VM"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R", enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 766M loops per second, 100 myus = 180 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x6e, id2
0xff, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xbf,
id2 0x60
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x6e, id2
0xff, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xf9,
id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x6e, id2
0xff, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000.
Lock status for 0x000000 (size 0x010000) is 00, full access
Lock status for 0x010000 (size 0x010000) is 00, full access
Lock status for 0x020000 (size 0x010000) is 00, full access
Lock status for 0x030000 (size 0x010000) is 00, full access
Lock status for 0x040000 (size 0x010000) is 00, full access
Lock status for 0x050000 (size 0x010000) is 00, full access
Lock status for 0x060000 (size 0x010000) is 00, full access
Lock status for 0x070000 (size 0x010000) is 00, full access
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip
bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip
bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xf9, id2
0x8f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xf9, id2
0x8f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x6e, id2
0xff, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe5, id2
0xea, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xf9, id2 0x8f
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xf9, id2
0x8f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xf9, id2
0x8f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and
chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI
and chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond
W29EE011 because the probing sequence puts the AMIC A49LF040A in a
funky state. Use 'flashrom -c W29EE011' if you have a board with this
chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xbf,
id2 0x60
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
probe timing information, using default 10mS/40uS. probe_jedec_common:
id1 0xbf, id2 0x60
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host
bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type
Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus
type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus
type Non-SPI and chip bus type SPI are incompatible.
No operations were specified.
root at bismuth:/home/thykka# lspci -nnvvvxxx
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a5]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] Vendor Specific Information <?>
	Capabilities: [a0] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a5 80
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 02 08 00 40 80 1c 00 00 00 00 00 00 00 00 00
60: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 11 11 11 01 33 33 00 00 00 00 00 00 0a 38 00
a0: 02 00 30 00 1b 4a 00 1f 02 0b 00 00 00 00 00 00
b0: 80 00 00 00 30 00 00 00 00 00 32 26 20 10 00 00
c0: 00 00 00 00 00 40 0e 28 00 00 00 00 00 00 00 00
d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 30 01
e0: 00 00 00 00 09 a0 06 01 00 02 00 00 00 00 00 00
f0: 00 00 00 00 02 00 00 00 68 0f 03 00 00 00 00 00

00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP
Controller [8086:2571] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fc900000-fe9fffff
	Prefetchable memory behind bridge: d7f00000-f7efffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp
00: 86 80 71 25 07 01 a0 00 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
20: 90 fc 90 fe f0 d7 e0 f7 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00

00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P
Processor to I/O Memory Interface [8086:2576] (rev 02)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00: 86 80 76 25 02 00 80 00 02 00 80 08 00 00 00 00
10: 00 00 cf fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 43 65 10 04 00 00 00 00 04 00 00 00 00 00 00 00
50: 01 00 80 00 02 01 80 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 55 05 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 08 00
b0: 00 00 00 00 f0 43 fc 7d 01 00 00 00 09 00 00 00
c0: 00 08 00 00 20 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff 3f
e0: 01 00 00 00 00 00 01 02 ff 0e 00 00 00 00 04 00
f0: 00 0c 02 00 00 00 00 00 68 0f 03 00 74 fc 00 00

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at eec0 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: c1 ee 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at ef00 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at ef20 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ef40 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd
00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00
10: 00 f8 bf fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 80
70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 55 55 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 80 00 00 88 83 40 00 66 0f 05 00 06 14 00 00

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev c2)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: 40000000-400fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp
00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 40 d0 d0 80 22
20: a0 fe a0 fe 00 40 00 40 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 c1 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 53 31

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
LPC Interface Bridge [8086:24d0] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: iTCO_wdt, intel-rng
00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 01 00
50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00
60: 8a 8b 85 85 d0 00 00 00 85 80 80 8b 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 20 02 00 00 38 00 00 00 0d 00 00 00 00 03 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00
e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45
f0: 00 00 64 00 04 00 00 00 66 0f 05 3e 00 00 00 00

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8f [Master
SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at efe0 [size=8]
	Region 1: I/O ports at efac [size=4]
	Region 2: I/O ports at efa0 [size=8]
	Region 3: I/O ports at efa8 [size=4]
	Region 4: I/O ports at ef90 [size=16]
	Region 5: Memory at 40100000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: ata_piix
00: 86 80 db 24 07 00 88 02 02 8f 01 01 00 00 00 00
10: e1 ef 00 00 ad ef 00 00 a1 ef 00 00 a9 ef 00 00
20: 91 ef 00 00 00 00 10 40 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: 77 e3 00 c0 0b 00 00 00 03 00 11 00 00 00 00 00
50: 00 00 00 00 30 30 00 00 00 00 00 00 00 00 00 00
60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80a6]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 0400 [size=32]
	Kernel modules: i2c-i801
00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34
[GeForce FX 5200] [10de:0322] (rev a1)
	Subsystem: XFX Pine Group Inc. Device [1682:203c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3+ Rate=x4,x8
		Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
	Kernel driver in use: nvidia
	Kernel modules: nvidia-173, nvidiafb, nouveau
00: de 10 22 03 07 00 b0 02 a1 00 00 03 00 f8 00 00
10: 00 00 00 fd 08 00 00 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 82 16 3c 20
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
40: 82 16 3c 20 02 00 30 00 1b 0e 00 1f 02 43 00 1f
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100
Ethernet Controller [8086:1050] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80f8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 14000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at df00 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: e100
	Kernel modules: e100
00: 86 80 50 10 17 01 90 02 02 00 00 02 00 40 00 00
10: 00 f0 af fe 01 df 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f8 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe
e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00

02:09.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit
Ethernet Controller [8086:1076]
	Subsystem: Intel Corporation Device [8086:1176]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (63750ns min), Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at feac0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at feaa0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at de80 [size=64]
	Expansion ROM at 40000000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048
DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: e1000
	Kernel modules: e1000
00: 86 80 76 10 17 01 30 02 00 00 00 02 04 40 00 00
10: 00 00 ac fe 00 00 aa fe 81 de 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 11
30: 00 00 a8 fe dc 00 00 00 00 00 00 00 0b 01 ff 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 22 c8
e0: 00 20 00 28 07 f0 02 00 00 00 40 00 00 00 00 00
f0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00

root at bismuth:/home/thykka# superiotool -deV
superiotool r3844
Probing for ALi Super I/O at 0x3f0...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
  Failed. Returned data: vid=0x42fe, id=0x8482
Probing for Fintek Super I/O at 0x4e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id=0x8284, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Found Winbond W83627THF/THG (id=0x82, rev=0x84) at 0x2e
Register dump:
idx 20 21 22 23 24 25 26 28  29 2a 2b 2c 2d 2e 2f
val 82 84 ff fe 42 00 00 20  00 00 00 00 00 00 ff
def 82 NA ff 00 MM 00 MM 00  00 00 MM MM MM 00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f4 f5
val 00 03 f0 06 02 0e 00 ff  00 00
def 01 03 f0 06 02 0e 00 ff  00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 01 03 78 07 03 3a
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 01 02 f8 03 00 00
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 42
def 01 00 60 00 64 01 0c 80
LDN 0x07 (GPIO 1, GPIO 5, game port, MIDI port)
idx 30 60 61 62 63 70 f0 f1  f2 f3 f4 f5
val 00 02 01 03 30 00 ff ff  ff ff ff ff
def 00 02 01 03 30 09 ff 00  00 ff 00 00
LDN 0x08 (GPIO 2)
idx 30 f0 f1 f2 f3 f4 f5 f6  f7
val 00 ff ff ff 00 ff 00 00  00
def 00 ff 00 00 00 RR 00 00  00
LDN 0x09 (GPIO 3, GPIO 4)
idx 30 f0 f1 f2 f3 f4 f5 f6
val 00 ef 4f 00 00 fe 20 00
def 00 ff 00 00 00 ff 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5  e6 e7 f0 f1 f3 f4 f6 f7  f9 fe ff
val 00 00 00 00 f3 02 40 00  00 00 00 8f 3b 00 00 00  00 00 00
def 00 00 00 00 MM MM 00 00  00 00 00 00 00 00 00 00  00 RR RR
LDN 0x0b (Hardware monitor)
idx 30 60 61 70
val 01 02 90 00
def 00 00 00 00
Hardware monitor (0x0295)
Register dump:
idx 00 01 02 03 04 05 06 07  08 09 0a 0b 0c 0d 0e 0f  10 11 12 13 14
15 16 17  18 19 1a 1b 1c 1d 1e 1f  20 21 22 23 24 25 26 27  28 29 2b
2c 2d 2e 2f 30  31 32 33 34 35 36 37 38  39 3a 3b 3c 3d 3e 3f 40  41
42 43 44 45 46 47 48  49 4a 4b 4c 4d 4e 4f
val 01 ff 01 ff 00 00 00 00  01 01 01 01 3c 3c 0a 0a  01 ff 00 00 00
01 01 3c  42 00 ff ff 24 32 00 e3  57 cb d6 be ff e9 c0 2e  9a 86 f0
00 34 4a b8 2a  cb 80 80 06 16 00 4c c0  16 00 0b 40 32 00 00 03  00
00 fe ff 00 00 af 2d  03 01 c4 18 95 06 a3
def RR ff RR ff 00 00 00 00  01 01 01 01 3c 3c 0a 0a  RR ff 00 00 00
01 01 3c  43 RR ff ff RR RR NA NA  NA NA NA NA NA RR RR NA  NA NA NA
NA NA NA NA NA  NA NA NA NA RR RR RR RR  NA NA NA NA NA RR RR 03  00
00 fe ff RR RR 5f NA  03 RR 44 18 15 80 5c
LDN 0x00 (Bank 0)
idx 50 51 52 53 54 55 56 57  58 59 5d 5e 5f
val ff ff 80 ff ff ff 00 80  90 20 84 ff 05
def NA NA NA NA NA NA 00 80  90 70 00 RR RR
LDN 0x01 (Bank 1)
idx 50 51 52 53 54 55 56
val 37 00 00 4b 00 50 00
def NA NA 00 4b 00 50 00
LDN 0x02 (Bank 2)
idx 50 51 52 53 54 55 56
val d0 00 00 4b 00 50 00
def NA NA 00 4b 00 50 00
LDN 0x04 (Bank 4)
idx 50 51 52 53 54 55 56 59  5a 5b
val 00 13 00 00 fe 0b 00 d6  09 03
def 00 ff RR 00 00 00 00 00  00 00
LDN 0x05 (Bank 5)
idx 50 51 52 53 54 55 56 57
val c0 66 00 00 47 55 60 40
def NA NA RR RR NA NA NA NA
LDN 0x06 (Bank 6)
idx 50
val c8
def RR
Probing for Winbond Super I/O (init=0x88) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
root at bismuth:/home/thykka#

latest official bios:
http://dlcdnet.asus.com/pub/ASUS/mb/sock478/p4p800-vm/P4PVM1018.zip




More information about the flashrom mailing list