[flashrom] [PATCH 1/1] Mark Gigabyte GA-6ETXDR as UNSUPPORTED so far
Peter Lemenkov
lemenkov at gmail.com
Wed Sep 15 12:31:10 CEST 2010
Hello!
2010/9/15 Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>:
>> --- a/chipset_enable.c
>> +++ b/chipset_enable.c
>> @@ -802,6 +802,23 @@ static int enable_flash_ck804(struct pci_dev *dev, const char *name)
>> return 0;
>> }
>>
>> +static int enable_flash_osb4(struct pci_dev *dev, const char *name)
>> +{
>> + uint8_t tmp;
>> +
>> + buses_supported = CHIP_BUSTYPE_PARALLEL;
>> +
>> + tmp = INB(0xc06);
>> + tmp |= 0x1;
>> + OUTB(tmp, 0xc06);
>> +
>> + tmp = INB(0xc6f);
>> + tmp |= 0x40;
>> + OUTB(tmp, 0xc6f);
>> +
>> + return 0;
>> +}
>> +
> Funny. The 0xc6f access looks very similar to parts of the SB400 chipset
> enable. (Side note: we should ask AMD if the SB400 chipset enable is
> correct.)
>
> Peter, could you please attach /proc/ioports and check if dmesg mentions
> 0xc06 or 0xc6f or anything close to that?
Attached /proc/ioports and dmesg contents.
--
With best regards, Peter Lemenkov.
-------------- next part --------------
Linux version 2.6.18-164.15.1.el5 (mockbuild at builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Mar 17 11:37:14 EDT 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524272
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294896 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 AMI ) @ 0x000ff8f0
ACPI: RSDT (v001 RCC RCCNILE 0x00000011 MSFT 0x01000000) @ 0x7fff0000
ACPI: FADT (v001 RCC RCCNILE 0x00000011 MSFT 0x01000000) @ 0x7fff0030
ACPI: MADT (v001 RCC RCCNILE 0x00000011 MSFT 0x01000000) @ 0x7fff00b0
ACPI: DSDT (v001 RCC CNB30LE 0x00000102 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:11 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:11 APIC version 17
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Detected 850.071 MHz processor.
Built 1 zonelists. Total pages: 524272
Kernel command line: ro root=/dev/sda5
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0762000 soft=c0742000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071868k/2097088k available (2161k kernel code, 23864k reserved, 900k data, 228k init, 1179584k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1700.14 BogoMIPS (lpj=850071)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
ACPI Warning (dswload-0695): Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [CMOS] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [APC_] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [G317] had invalid type (String) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20060707]
ACPI Warning (dswload-0695): Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20060707]
CPU0: Intel(R) Pentium(R) III CPU family 1133MHz stepping 01
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 11000
CPU 1 irqstacks, hard=c0763000 soft=c0743000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1699.87 BogoMIPS (lpj=849935)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) III CPU family 1133MHz stepping 01
Total of 2 processors activated (3400.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
Using local APIC timer interrupts.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=2582
checking if image is initramfs... it is
Freeing initrd memory: 2439k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdbb1, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [NRTH] (0000:00)
PCI: Firmware left 0000:00:07.0 e100 interrupts enabled, disabling
PCI: Firmware left 0000:00:08.0 e100 interrupts enabled, disabling
ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT]
ACPI: Wrong _BBN value, reboot and use option 'pci=noacpi'
ACPI: PCI _CRS 1 overrides _BBN 0
ACPI: PCI Root Bridge [PCI1] (0000:01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNUS] (IRQs *10), disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x40b-0x40b has been reserved
pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:02: ioport range 0xc14-0xc14 has been reserved
pnp: 00:02: ioport range 0xc49-0xc49 has been reserved
pnp: 00:02: ioport range 0xc52-0xc52 has been reserved
pnp: 00:02: ioport range 0xc6c-0xc6c has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1015745939.691:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 5B25A14E82669E36
- key was been created 253093822 seconds in future
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:09.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: duty_cycle spans bit 4
ACPI: duty_cycle spans bit 4
ACPI: Thermal Zone [THRM] (30 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports<6>Time: tsc clocksource has been installed.
S0 S1 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 405k
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNUS] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNUS] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfeafe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 26 (level, low) -> IRQ 169
sym0: <1010-66> rev 0x1 at pci 0000:01:04.0 irq 169
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
Vendor: FUJITSU Model: MAW3073NP Rev: 0104
Type: Direct-Access ANSI SCSI revision: 03
target0:0:1: tagged command queuing enabled, command queue depth 16.
target0:0:1: Beginning Domain Validation
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: Ending Domain Validation
SCSI device sda: 143638992 512-byte hdwr sectors (73543 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 143638992 512-byte hdwr sectors (73543 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write through
sda: sda1 sda2 < sda5 >
sd 0:0:1:0: Attached scsi disk sda
Vendor: FUJITSU Model: MAW3073NP Rev: 0104
Type: Direct-Access ANSI SCSI revision: 03
target0:0:2: tagged command queuing enabled, command queue depth 16.
target0:0:2: Beginning Domain Validation
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:2: Ending Domain Validation
SCSI device sdb: 143638992 512-byte hdwr sectors (73543 MB)
sdb: Write Protect is off
sdb: Mode Sense: b3 00 00 08
SCSI device sdb: drive cache: write through
SCSI device sdb: 143638992 512-byte hdwr sectors (73543 MB)
sdb: Write Protect is off
sdb: Mode Sense: b3 00 00 08
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3
sd 0:0:2:0: Attached scsi disk sdb
ACPI: PCI Interrupt 0000:01:04.1[B] -> GSI 27 (level, low) -> IRQ 177
sym1: <1010-66> rev 0x1 at pci 0000:01:04.1 irq 177
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.3
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel at redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1015745978.285:2): selinux=0 auid=4294967295 ses=4294967295
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 29 (level, low) -> IRQ 185
e100: eth0: e100_probe: addr 0xfeafc000, irq 185, MAC addr 00:20:ED:43:13:C2
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 30 (level, low) -> IRQ 193
e100: eth1: e100_probe: addr 0xfeafd000, irq 193, MAC addr 00:20:ED:43:13:C3
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
FDC 0 is a National Semiconductor PC87306
sd 0:0:1:0: Attached scsi generic sg0 type 0
sd 0:0:2:0: Attached scsi generic sg1 type 0
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
-------------- next part --------------
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f2-03f5 : floppy
03f7-03f7 : floppy DIR
03f8-03ff : serial
040b-040b : pnp 00:02
04d0-04d1 : pnp 00:02
04d6-04d6 : pnp 00:02
0500-0503 : ACPI PM1a_EVT_BLK
0504-0505 : ACPI PM1b_CNT_BLK
0508-050b : ACPI PM_TMR
050c-0511 : ACPI CPU throttle
0514-051b : ACPI GPE0_BLK
0540-0543 : ACPI PM1b_EVT_BLK
0544-0545 : ACPI PM1a_CNT_BLK
0550-0557 : ACPI GPE1_BLK
0580-0587 : piix4_smbus
0c14-0c14 : pnp 00:02
0c49-0c49 : pnp 00:02
0c52-0c52 : pnp 00:02
0c6c-0c6c : pnp 00:02
0cf8-0cff : PCI conf1
276d-276d : motherboard
a800-a83f : 0000:00:07.0
a800-a83f : e100
b000-b0ff : 0000:00:09.0
b800-b83f : 0000:00:08.0
b800-b83f : e100
c000-c0ff : 0000:01:04.0
c000-c0ff : sym53c8xx
d000-d0ff : 0000:01:04.1
d000-d0ff : sym53c8xx
ffa0-ffaf : 0000:00:0f.1
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
More information about the flashrom
mailing list