[flashrom] [PATCH] Remove sharplhf00l04.c

[Carl-Daniel Hailfinger]

Am 20.06.2011 01:13 schrieb Michael Karcher:
> The currently unreferenced function in sharplhf00l04.c does a standard
> FWH block protection reset (writes 0 to the protection register) and a
> standard FWH block erase.
>
> The locking blocks of the FWH block lock cover 128KB areas, and thats
> the only thing page_size is used for in the functions referenced in the
> LHF00L04 entry.
>   

My datasheet talks about 8 kB sectors and 64 kB blocks in "Figure 3.
Memory Map", but "Table 8. FWH Flash Registers Configuration Map" only
mentions registers for the 8 kB sectors in the top 64 kB block
explicitly. "Table 8" also mentions "XX002H Whole Block Lock Register"
as generic placeholder, and AFAICS those two X mean you have one block
lock register for each of the 15 bottom 64 kB blocks and one for each of
the 8 top 8 kB sectors. That also means the 82802ab unlocking as is
can't be used.

I was unable to find any 128 kB reference in my datasheet, so I'm going
to Nack that part.


> Finally, this adds a comment that there are non-volatile (flash memory)
> lock bits for 8 sectors in the last 64KB. They are write-only and clearable
> at once. Readback seems unsupported.
>   

I have a slightly different interpretation of the datasheet (see above),
so I'm not sure how to proceed.


> Signed-off-by: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>
>   

Killing sharplhf00l04.c is a good thing, though, so that part is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/