[flashrom] [commit] r1274 - trunk
repository service
svn at flashrom.org
Mon Mar 7 02:08:10 CET 2011
Author: hailfinger
Date: Mon Mar 7 02:08:09 2011
New Revision: 1274
URL: http://flashrom.org/trac/flashrom/changeset/1274
Log:
Simplify pcidev_init by killing the vendorid parameter which was pretty
useless anyway since it was present in the pcidevs parameter as well.
This also allows us to handle multiple programmers with different vendor
IDs in the same driver.
Fix compilation of flashrom with only the nicrealtek driver.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>
Modified:
trunk/atahpt.c
trunk/drkaiser.c
trunk/flashrom.c
trunk/gfxnvidia.c
trunk/nic3com.c
trunk/nicintel_spi.c
trunk/nicnatsemi.c
trunk/nicrealtek.c
trunk/ogp_spi.c
trunk/pcidev.c
trunk/print.c
trunk/print_wiki.c
trunk/programmer.h
trunk/satamv.c
trunk/satasii.c
Modified: trunk/atahpt.c
==============================================================================
--- trunk/atahpt.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/atahpt.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -44,8 +44,7 @@
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_HPT, PCI_BASE_ADDRESS_4,
- ata_hpt);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_4, ata_hpt);
/* Enable flash access. */
reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS);
Modified: trunk/drkaiser.c
==============================================================================
--- trunk/drkaiser.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/drkaiser.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -43,8 +43,7 @@
get_io_perms();
- addr = pcidev_init(PCI_VENDOR_ID_DRKAISER, PCI_BASE_ADDRESS_2,
- drkaiser_pcidev);
+ addr = pcidev_init(PCI_BASE_ADDRESS_2, drkaiser_pcidev);
/* Write magic register to enable flash write. */
rpci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR,
Modified: trunk/flashrom.c
==============================================================================
--- trunk/flashrom.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/flashrom.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -61,7 +61,6 @@
#endif
#if CONFIG_NICREALTEK == 1
PROGRAMMER_NICREALTEK
- PROGRAMMER_NICREALTEK2
#endif
#if CONFIG_NICNATSEMI == 1
PROGRAMMER_NICNATSEMI
@@ -182,27 +181,13 @@
#if CONFIG_NICREALTEK == 1
{
+ /* This programmer works for Realtek RTL8139 and SMC 1211. */
.name = "nicrealtek",
+ //.name = "nicsmc1211",
.init = nicrealtek_init,
.shutdown = nicrealtek_shutdown,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
- .chip_readb = nicrealtek_chip_readb,
- .chip_readw = fallback_chip_readw,
- .chip_readl = fallback_chip_readl,
- .chip_readn = fallback_chip_readn,
- .chip_writeb = nicrealtek_chip_writeb,
- .chip_writew = fallback_chip_writew,
- .chip_writel = fallback_chip_writel,
- .chip_writen = fallback_chip_writen,
- .delay = internal_delay,
- },
- {
- .name = "nicsmc1211",
- .init = nicsmc1211_init,
- .shutdown = nicrealtek_shutdown,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
.chip_readb = nicrealtek_chip_readb,
.chip_readw = fallback_chip_readw,
.chip_readl = fallback_chip_readl,
Modified: trunk/gfxnvidia.c
==============================================================================
--- trunk/gfxnvidia.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/gfxnvidia.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -66,8 +66,7 @@
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_NVIDIA, PCI_BASE_ADDRESS_0,
- gfx_nvidia);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, gfx_nvidia);
io_base_addr += 0x300000;
msg_pinfo("Detected NVIDIA I/O base address: 0x%x.\n", io_base_addr);
Modified: trunk/nic3com.c
==============================================================================
--- trunk/nic3com.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/nic3com.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -59,8 +59,7 @@
{
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, PCI_BASE_ADDRESS_0,
- nics_3com);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_3com);
id = pcidev_dev->device_id;
Modified: trunk/nicintel_spi.c
==============================================================================
--- trunk/nicintel_spi.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/nicintel_spi.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -144,8 +144,7 @@
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_INTEL, PCI_BASE_ADDRESS_0,
- nics_intel_spi);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_intel_spi);
nicintel_spibar = physmap("Intel Gigabit NIC w/ SPI flash",
io_base_addr, 4096);
Modified: trunk/nicnatsemi.c
==============================================================================
--- trunk/nicnatsemi.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/nicnatsemi.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -39,8 +39,7 @@
{
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_NATSEMI, PCI_BASE_ADDRESS_0,
- nics_natsemi);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_natsemi);
buses_supported = CHIP_BUSTYPE_PARALLEL;
Modified: trunk/nicrealtek.c
==============================================================================
--- trunk/nicrealtek.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/nicrealtek.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -32,10 +32,6 @@
const struct pcidev_status nics_realtek[] = {
{0x10ec, 0x8139, OK, "Realtek", "RTL8139/8139C/8139C+"},
- {},
-};
-
-const struct pcidev_status nics_realteksmc1211[] = {
{0x1113, 0x1211, OK, "SMC2", "1211TX"}, /* RTL8139 clone */
{},
};
@@ -44,20 +40,7 @@
{
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_REALTEK, PCI_BASE_ADDRESS_0,
- nics_realtek);
-
- buses_supported = CHIP_BUSTYPE_PARALLEL;
-
- return 0;
-}
-
-int nicsmc1211_init(void)
-{
- get_io_perms();
-
- io_base_addr = pcidev_init(PCI_VENDOR_ID_SMC1211, PCI_BASE_ADDRESS_0,
- nics_realteksmc1211);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_realtek);
buses_supported = CHIP_BUSTYPE_PARALLEL;
Modified: trunk/ogp_spi.c
==============================================================================
--- trunk/ogp_spi.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/ogp_spi.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -120,8 +120,7 @@
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_OGP, PCI_BASE_ADDRESS_0,
- ogp_spi);
+ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, ogp_spi);
ogp_spibar = physmap("OGP registers", io_base_addr, 4096);
Modified: trunk/pcidev.c
==============================================================================
--- trunk/pcidev.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/pcidev.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -188,8 +188,7 @@
return 0;
}
-uintptr_t pcidev_init(uint16_t vendor_id, int bar,
- const struct pcidev_status *devs)
+uintptr_t pcidev_init(int bar, const struct pcidev_status *devs)
{
struct pci_dev *dev;
struct pci_filter filter;
@@ -203,8 +202,7 @@
pci_scan_bus(pacc); /* We want to get the list of devices */
pci_filter_init(pacc, &filter);
- /* Filter by vendor and also bb:dd.f (if supplied by the user). */
- filter.vendor = vendor_id;
+ /* Filter by bb:dd.f (if supplied by the user). */
pcidev_bdf = extract_programmer_param("pci");
if (pcidev_bdf != NULL) {
if ((msg = pci_filter_parse_slot(&filter, pcidev_bdf))) {
@@ -216,6 +214,9 @@
for (dev = pacc->devices; dev; dev = dev->next) {
if (pci_filter_match(&filter, dev)) {
+ /* FIXME: We should count all matching devices, not
+ * just those with a valid BAR.
+ */
if ((addr = pcidev_validate(dev, bar, devs)) != 0) {
curaddr = addr;
pcidev_dev = dev;
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/print.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -249,9 +249,6 @@
printf("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICREALTEK].name);
print_supported_pcidevs(nics_realtek);
- printf("\nSupported devices for the %s programmer:\n",
- programmer_table[PROGRAMMER_NICREALTEK2].name);
- print_supported_pcidevs(nics_realteksmc1211);
#endif
#if CONFIG_NICNATSEMI == 1
printf("\nSupported devices for the %s programmer:\n",
Modified: trunk/print_wiki.c
==============================================================================
--- trunk/print_wiki.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/print_wiki.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -279,7 +279,6 @@
#endif
#if CONFIG_NICREALTEK == 1
print_supported_pcidevs_wiki(nics_realtek);
- print_supported_pcidevs_wiki(nics_realteksmc1211);
#endif
#if CONFIG_NICNATSEMI == 1
print_supported_pcidevs_wiki(nics_natsemi);
Modified: trunk/programmer.h
==============================================================================
--- trunk/programmer.h Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/programmer.h Mon Mar 7 02:08:09 2011 (r1274)
@@ -36,7 +36,6 @@
#endif
#if CONFIG_NICREALTEK == 1
PROGRAMMER_NICREALTEK,
- PROGRAMMER_NICREALTEK2,
#endif
#if CONFIG_NICNATSEMI == 1
PROGRAMMER_NICNATSEMI,
@@ -220,7 +219,7 @@
const char *device_name;
};
uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs);
-uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs);
+uintptr_t pcidev_init(int bar, const struct pcidev_status *devs);
/* rpci_write_* are reversible writes. The original PCI config space register
* contents will be restored on shutdown.
*/
@@ -384,12 +383,10 @@
/* nicrealtek.c */
#if CONFIG_NICREALTEK == 1
int nicrealtek_init(void);
-int nicsmc1211_init(void);
int nicrealtek_shutdown(void);
void nicrealtek_chip_writeb(uint8_t val, chipaddr addr);
uint8_t nicrealtek_chip_readb(const chipaddr addr);
extern const struct pcidev_status nics_realtek[];
-extern const struct pcidev_status nics_realteksmc1211[];
#endif
/* nicnatsemi.c */
Modified: trunk/satamv.c
==============================================================================
--- trunk/satamv.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/satamv.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -67,7 +67,7 @@
/* No need to check for errors, pcidev_init() will not return in case
* of errors.
*/
- addr = pcidev_init(0x11ab, PCI_BASE_ADDRESS_0, satas_mv);
+ addr = pcidev_init(PCI_BASE_ADDRESS_0, satas_mv);
mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000);
if (mv_bar == ERROR_PTR)
Modified: trunk/satasii.c
==============================================================================
--- trunk/satasii.c Sun Mar 6 23:52:55 2011 (r1273)
+++ trunk/satasii.c Mon Mar 7 02:08:09 2011 (r1274)
@@ -47,7 +47,7 @@
get_io_perms();
- pcidev_init(PCI_VENDOR_ID_SII, PCI_BASE_ADDRESS_0, satas_sii);
+ pcidev_init(PCI_BASE_ADDRESS_0, satas_sii);
id = pcidev_dev->device_id;
More information about the flashrom
mailing list