[flashrom] [PATCH v2] Add Altera USB Blaster SPI programmer
Kyösti Mälkki
kyosti.malkki at gmail.com
Tue Sep 11 21:55:47 CEST 2012
Adds support for the Altera USB-Blaster programming dongle in SPI mode.
Tested on both original product and a clone dongle.
Signed-off-by: James Laird <jhl at mafipulation.org>
[km: Handle issues from review, cleanup and rebase.]
Signed-off-by: Kyösti Mälkki <kyosti.malkki at gmail.com>
diff --git a/Makefile b/Makefile
index 9309ce5..e88fbd3 100644
--- a/Makefile
+++ b/Makefile
@@ -105,7 +105,7 @@ UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
else
override CONFIG_PONY_SPI = no
endif
-# Dediprog and FT2232 are not supported under DOS (missing USB support).
+# Dediprog, FT2232 and USB-Blaster are not supported under DOS (missing USB support).
ifeq ($(CONFIG_DEDIPROG), yes)
UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
else
@@ -116,6 +116,11 @@ UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
else
override CONFIG_FT2232_SPI = no
endif
+ifeq ($(CONFIG_USBBLASTER_SPI), yes)
+UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
+else
+override CONFIG_USBBLASTER_SPI = no
+endif
endif
# FIXME: Should we check for Cygwin/MSVC as well?
@@ -217,7 +222,7 @@ UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
else
override CONFIG_SERPROG = no
endif
-# Dediprog and FT2232 are not supported with libpayload (missing libusb support)
+# Dediprog, FT2232 and USB-Blaster are not supported with libpayload (missing libusb support)
ifeq ($(CONFIG_DEDIPROG), yes)
UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
else
@@ -228,6 +233,11 @@ UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
else
override CONFIG_FT2232_SPI = no
endif
+ifeq ($(CONFIG_USBBLASTER_SPI), yes)
+UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
+else
+override CONFIG_USBBLASTER_SPI = no
+endif
endif
ifneq ($(TARGET_OS), Linux)
@@ -370,6 +380,9 @@ CONFIG_SATAMV ?= yes
# Enable Linux spidev interface by default. We disable it on non-Linux targets.
CONFIG_LINUX_SPI ?= yes
+# Always enable USB-Blaster SPI for now.
+CONFIG_USBBLASTER_SPI ?= yes
+
# Disable wiki printing by default. It is only useful if you have wiki access.
CONFIG_PRINT_WIKI ?= no
@@ -459,12 +472,29 @@ PROGRAMMER_OBJS += atahpt.o
NEED_PCI := yes
endif
-ifeq ($(CONFIG_FT2232_SPI), yes)
-FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb")
# This is a totally ugly hack.
-FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
-FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
-PROGRAMMER_OBJS += ft2232_spi.o
+WANT_LIBFTDI := no
+HAVE_LIBFTDI := $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && echo "yes")
+ifeq ($(CONFIG_FT2232_SPI), yes)
+ WANT_LIBFTDI := yes
+ ifeq ($(HAVE_LIBFTDI), yes)
+ FEATURE_CFLAGS += -DCONFIG_FT2232_SPI=1
+ PROGRAMMER_OBJS += ft2232_spi.o
+ endif
+endif
+ifeq ($(CONFIG_USBBLASTER_SPI), yes)
+ WANT_LIBFTDI := yes
+ ifeq ($(HAVE_LIBFTDI), yes)
+ FEATURE_CFLAGS += -DCONFIG_USBBLASTER_SPI=1
+ PROGRAMMER_OBJS += usbblaster_spi.o
+ endif
+endif
+
+ifeq ($(WANT_LIBFTDI), yes)
+ ifeq ($(HAVE_LIBFTDI), yes)
+ FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb")
+ FEATURE_LIBS += $(FTDILIBS)
+ endif
endif
ifeq ($(CONFIG_DUMMY), yes)
@@ -745,7 +775,7 @@ export LINUX_SPI_TEST
features: compiler
@echo "FEATURES := yes" > .features.tmp
-ifeq ($(CONFIG_FT2232_SPI), yes)
+ifeq ($(WANT_LIBFTDI), yes)
@printf "Checking for FTDI support... "
@echo "$$FTDI_TEST" > .featuretest.c
@$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \
diff --git a/README b/README
index 8e812be..7f24cca 100644
--- a/README
+++ b/README
@@ -45,8 +45,8 @@ Build Instructions
To build flashrom you need to install the following software:
* pciutils+libpci (if you want support for mainboard or PCI device flashing)
- * libusb (if you want FT2232 or Dediprog support)
- * libftdi (if you want FT2232 support)
+ * libusb (if you want FT2232, Dediprog or USB-Blaster support)
+ * libftdi (if you want FT2232 or USB-Blaster support)
Linux et al:
diff --git a/flashrom.c b/flashrom.c
index fdc5412..0bd3a4a 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -262,6 +262,16 @@ const struct programmer_entry programmer_table[] = {
},
#endif
+#if CONFIG_USBBLASTER_SPI == 1
+ {
+ .name = "usbblaster_spi",
+ .init = usbblaster_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
{0}, /* This entry corresponds to PROGRAMMER_INVALID. */
};
diff --git a/print.c b/print.c
index 582a49e..e23e9e6 100644
--- a/print.c
+++ b/print.c
@@ -547,6 +547,11 @@ void print_supported(void)
programmer_table[PROGRAMMER_LINUX_SPI].name);
msg_ginfo("Device files /dev/spidev*.*\n");
#endif
+#if CONFIG_USBBLASTER_SPI == 1
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
+ programmer_table[PROGRAMMER_USBBLASTER_SPI].name);
+ msg_ginfo("Altera USB-Blaster cable\n");
+#endif
}
#if CONFIG_INTERNAL == 1
diff --git a/programmer.h b/programmer.h
index 51b9c40..2c2063c 100644
--- a/programmer.h
+++ b/programmer.h
@@ -87,6 +87,9 @@ enum programmer {
#if CONFIG_LINUX_SPI == 1
PROGRAMMER_LINUX_SPI,
#endif
+#if CONFIG_USBBLASTER_SPI == 1
+ PROGRAMMER_USBBLASTER_SPI,
+#endif
PROGRAMMER_INVALID /* This must always be the last entry. */
};
@@ -434,6 +437,11 @@ extern const struct usbdev_status devs_ft2232spi[];
void print_supported_usbdevs(const struct usbdev_status *devs);
#endif
+/* usbblaster_spi.c */
+#if CONFIG_USBBLASTER_SPI == 1
+int usbblaster_spi_init(void);
+#endif
+
/* rayer_spi.c */
#if CONFIG_RAYER_SPI == 1
int rayer_spi_init(void);
@@ -512,6 +520,9 @@ enum spi_controller {
#if CONFIG_SERPROG == 1
SPI_CONTROLLER_SERPROG,
#endif
+#if CONFIG_USBBLASTER_SPI == 1
+ SPI_CONTROLLER_USBBLASTER,
+#endif
};
#define MAX_DATA_UNSPECIFIED 0
diff --git a/usbblaster_spi.c b/usbblaster_spi.c
new file mode 100644
index 0000000..01fc722
--- /dev/null
+++ b/usbblaster_spi.c
@@ -0,0 +1,227 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2012 James Laird <jhl at mafipulation.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * Device should be connected as per "active serial" mode:
+ *
+ * +---------+------+-----------+
+ * | SPI | Pin | Altera |
+ * +---------+------+-----------+
+ * | SCLK | 1 | DCLK |
+ * | GND | 2,10 | GND |
+ * | VCC | 4 | VCC(TRGT) |
+ * | MISO | 7 | ASDO |
+ * | /CS | 8 | nCS |
+ * | MOSI | 9 | ASDI |
+ * +---------+------+-----------+
+ */
+
+#if CONFIG_USBBLASTER_SPI == 1
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include "flash.h"
+#include "programmer.h"
+#include "spi.h"
+#include <ftdi.h>
+
+/* Please keep sorted by vendor ID, then device ID. */
+
+#define ALTERA_VID 0x09fb
+#define ALTERA_USBBLASTER_PID 0x6001
+
+const struct usbdev_status devs_usbblasterspi[] = {
+ {ALTERA_VID, ALTERA_USBBLASTER_PID, NT, "Altera", "USB-Blaster"},
+ {},
+};
+
+static const struct spi_programmer spi_programmer_usbblaster;
+
+static struct ftdi_context ftdic;
+
+// command bytes
+#define BIT_BYTE (1<<7) // byte mode (rather than bitbang)
+#define BIT_READ (1<<6) // read request
+
+#define BIT_LED (1<<5)
+#define BIT_CS (1<<3)
+#define BIT_CLK (1<<0)
+#define BIT_TMS (1<<1)
+
+// The programmer shifts bits in the wrong order for SPI.
+uint8_t reverse(uint8_t b)
+{
+ b = ((b * 0x0802LU & 0x22110LU) | (b * 0x8020LU & 0x88440LU)) * 0x10101LU >> 16;
+ return b;
+}
+
+
+/* Returns 0 upon success, a negative number upon errors. */
+int usbblaster_spi_init(void)
+{
+ if (ftdi_init(&ftdic) < 0)
+ return -1;
+
+ if (ftdi_usb_open(&ftdic, ALTERA_VID, ALTERA_USBBLASTER_PID) < 0) {
+ msg_perr("Failed to open USB-Blaster: %s\n", ftdic.error_str);
+ return -1;
+ }
+
+ if (ftdi_usb_reset(&ftdic) < 0) {
+ msg_perr("Blaster reset failed\n");
+ return -1;
+ }
+
+ if (ftdi_set_latency_timer(&ftdic, 2) < 0) {
+ msg_perr("Blaster set latency timer failed\n");
+ return -1;
+ }
+
+ if (ftdi_write_data_set_chunksize(&ftdic, 4096) < 0 ||
+ ftdi_read_data_set_chunksize(&ftdic, 64) < 0) {
+ msg_perr("Blaster set chunk size failed\n");
+ return -1;
+ }
+ uint8_t buf[65];
+ memset(buf, 0, sizeof(buf));
+ buf[sizeof(buf)-1] = BIT_LED | BIT_CS;
+ if (ftdi_write_data(&ftdic, buf, sizeof(buf)) < 0) {
+ msg_perr("Blaster reset write failed\n");
+ return -1;
+ }
+ if (ftdi_read_data(&ftdic, buf, sizeof(buf)) < 0) {
+ msg_perr("Blaster reset read failed\n");
+ return -1;
+ }
+
+ register_spi_programmer(&spi_programmer_usbblaster);
+ return 0;
+}
+
+static int send_write(unsigned int writecnt, const unsigned char *writearr)
+{
+ uint8_t buf[64];
+ int i;
+
+ memset(buf, 0, sizeof(buf));
+ while (writecnt) {
+ unsigned int n_write = writecnt;
+ if (n_write > 63)
+ n_write = 63;
+
+ msg_pspew("writing %d-byte packet\n", n_write);
+
+ buf[0] = BIT_BYTE | (uint8_t)n_write;
+ for (i=0; i<n_write; i++) {
+ buf[i+1] = reverse(writearr[i]);
+ }
+ if (ftdi_write_data(&ftdic, buf, n_write+1) < 0) {
+ msg_perr("Blaster write failed\n");
+ return -1;
+ }
+
+ writearr += n_write;
+ writecnt -= n_write;
+ }
+ return 0;
+}
+
+static int send_read(unsigned int readcnt, unsigned char *readarr)
+{
+ uint8_t buf[64];
+ int i;
+
+ memset(buf, 0, sizeof(buf));
+ unsigned int n_readout = readcnt;
+ while (readcnt) {
+ unsigned int n_read = readcnt;
+ if (n_read > 63)
+ n_read = 63;
+
+ buf[0] = BIT_BYTE | BIT_READ | (uint8_t)n_read;
+ if (ftdi_write_data(&ftdic, buf, n_read + 1) < 0) {
+ msg_perr("Blaster write failed\n");
+ return -1;
+ }
+
+ readcnt -= n_read;
+ msg_pspew("reading %d-byte packet\n", n_read);
+ };
+
+ unsigned int n_read = n_readout;
+ while (n_read) {
+ int ret = ftdi_read_data(&ftdic, readarr, n_read);
+ if (ret < 0) {
+ msg_perr("Blaster read failed\n");
+ return -1;
+ }
+ for (i=0; i<ret; i++) {
+ readarr[i] = reverse(readarr[i]);
+ }
+ n_read -= ret;
+ readarr += ret;
+ }
+ return 0;
+}
+
+/* Returns 0 upon success, a negative number upon errors. */
+static int usbblaster_spi_send_command(struct flashctx *flash,
+ unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr,
+ unsigned char *readarr)
+{
+ int ret = 0;
+ uint8_t cmd;
+ // assert /CS
+ cmd = BIT_LED;
+ if (ftdi_write_data(&ftdic, &cmd, 1) < 0) {
+ msg_perr("Blaster write failed\n");
+ ret = -1;
+ }
+
+ if (!ret && writecnt)
+ ret = send_write(writecnt, writearr);
+
+ if (!ret && readcnt)
+ ret = send_read(readcnt, readarr);
+
+ cmd = BIT_CS;
+ if (ftdi_write_data(&ftdic, &cmd, 1) < 0) {
+ msg_perr("Blaster write failed\n");
+ ret = -1;
+ }
+
+ return ret;
+}
+
+
+static const struct spi_programmer spi_programmer_usbblaster = {
+ .type = SPI_CONTROLLER_USBBLASTER,
+ .max_data_read = 256,
+ .max_data_write = 256,
+ .command = usbblaster_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = default_spi_read,
+ .write_256 = default_spi_write_256,
+ .write_aai = default_spi_write_aai,
+};
+
+#endif
More information about the flashrom
mailing list