[flashrom] [commit] r1599 - trunk
repository service
svn at flashrom.org
Mon Sep 17 02:40:55 CEST 2012
Author: stefanct
Date: Mon Sep 17 02:40:54 2012
New Revision: 1599
URL: http://flashrom.org/trac/flashrom/changeset/1599
Log:
Allow to select FTDI device by serial number.
Requires libftdi > 0.5 (2004, commit ID a8f46ddc1595b1b07abfcce613acdafe5b8ddf9d).
Idea stolen from chromiumos commit 5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68
Signed-off-by: Shik Chen <shik at chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Modified:
trunk/flashrom.8
trunk/ft2232_spi.c
Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8 Mon Sep 17 02:05:44 2012 (r1598)
+++ trunk/flashrom.8 Mon Sep 17 02:40:54 2012 (r1599)
@@ -573,6 +573,15 @@
and the default interface is
.BR B .
.sp
+If there is more than one ft2232_spi-compatible device connected, you can select which one should be used by
+specifying its serial number with the
+.sp
+.B " flashrom \-p ft2232_spi:serial=number"
+.sp
+syntax where
+.B number
+is the serial number of the device (which can be found for example in the output of lsusb -v).
+.sp
All models supported by the ft2232_spi driver can configure the SPI clock rate by setting a divisor. The
expressible divisors are all even numbers between 2 and 2^17 (=131072) resulting in SPI clock frequencies of
6 MHz down to about 92 Hz for 12 MHz inputs. The default divisor is set to 2, but you can use another one by
Modified: trunk/ft2232_spi.c
==============================================================================
--- trunk/ft2232_spi.c Mon Sep 17 02:05:44 2012 (r1598)
+++ trunk/ft2232_spi.c Mon Sep 17 02:40:54 2012 (r1599)
@@ -283,7 +283,9 @@
msg_perr("Unable to select interface: %s\n", ftdic->error_str);
}
- f = ftdi_usb_open(ftdic, ft2232_vid, ft2232_type);
+ arg = extract_programmer_param("serial");
+ f = ftdi_usb_open_desc(ftdic, ft2232_vid, ft2232_type, NULL, arg);
+ free(arg);
if (f < 0 && f != -5) {
msg_perr("Unable to open FTDI device: %d (%s)\n", f,
More information about the flashrom
mailing list