[flashrom] [PATCH] Add selfcheck_board_enables().

Stefan Tauner stefan.tauner at alumni.tuwien.ac.at
Sat May 31 05:04:56 CEST 2014


Check for NULL termination of the array, that each board has the two
main PCI ID sets defined, that coreboot vendor and model fields are either
both set or unset, and that either an enable function or a max decode size is
available.

Signed-off-by: Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
---
 board_enable.c | 30 ++++++++++++++++++++++++++++++
 flashrom.c     |  2 ++
 programmer.h   |  1 +
 3 files changed, 33 insertions(+)

diff --git a/board_enable.c b/board_enable.c
index 2cf6776..2efc710 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -2463,6 +2463,36 @@ const struct board_match board_matches[] = {
 	{     0,      0,      0,      0,       0,      0,      0,      0, NULL,         NULL, NULL,           P3, NULL,          NULL,                    0,   NT, NULL}, /* end marker */
 };
 
+int selfcheck_board_enables(void)
+{
+	if (board_matches[ARRAY_SIZE(board_matches) - 1].vendor_name != NULL) {
+		msg_gerr("Board enables table miscompilation!\n");
+		return 1;
+	}
+
+	int ret = 0;
+	unsigned int i;
+	for (i = 0; i < ARRAY_SIZE(board_matches) - 1; i++) {
+		const struct board_match *b = &board_matches[i];
+		if (b->vendor_name == NULL || b->board_name == NULL) {
+			msg_gerr("ERROR: Board enable #%d does not define a vendor and board name.\n"
+				 "Please report a bug at flashrom at flashrom.org\n", i);
+			ret = 1;
+			continue;
+		}
+		if ((b->first_vendor == 0 || b->first_device == 0 ||
+		     b->second_vendor == 0 || b->second_device == 0) ||
+		    ((b->lb_vendor == NULL) ^ (b->lb_part == NULL)) ||
+		    (b->max_rom_decode_parallel == 0 && b->enable == NULL)) {
+			msg_gerr("ERROR: Board enable for %s %s is misdefined.\n"
+				 "Please report a bug at flashrom at flashrom.org\n",
+				 b->vendor_name, b->board_name);
+			ret = 1;
+		}
+	}
+	return ret;
+}
+
 /* Parse the <vendor>:<board> string specified by the user as part of -p internal:mainboard=<vendor>:<board>.
  * Parameters vendor and model will be overwritten. Returns 0 on success.
  * Note: strtok modifies the original string, so we work on a copy and allocate memory for the results.
diff --git a/flashrom.c b/flashrom.c
index 98101b7..fdb5cf7 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -1770,6 +1770,8 @@ int selfcheck(void)
 		}
 	}
 
+	ret |= selfcheck_board_enables();
+
 	/* TODO: implement similar sanity checks for other arrays where deemed necessary. */
 	return ret;
 }
diff --git a/programmer.h b/programmer.h
index b896ddf..30b0074 100644
--- a/programmer.h
+++ b/programmer.h
@@ -255,6 +255,7 @@ void internal_delay(unsigned int usecs);
 
 #if CONFIG_INTERNAL == 1
 /* board_enable.c */
+int selfcheck_board_enables(void);
 int board_parse_parameter(const char *boardstring, const char **vendor, const char **model);
 void w836xx_ext_enter(uint16_t port);
 void w836xx_ext_leave(uint16_t port);
-- 
Kind regards, Stefan Tauner





More information about the flashrom mailing list