[flashrom] [PATCH] Add support for GigaDevice GD25VQ41B
Hatim Kanchwala
hatim at hatimak.me
Sun Feb 21 11:41:18 CET 2016
On Sunday 21 February 2016 05:51 AM, Stefan Tauner wrote:
> On Sat, 13 Feb 2016 00:08:55 +0530
> Hatim Kanchwala <hatim at hatimak.me> wrote:
>
>> Here's the updated patch which incorporates Urja's suggestion. I have also fixed the (nasty :p) typo I made earlier.
>>
>> Signed-off-by: Hatim Kanchwala <hatim at hatimak.me>
>> ---
>> flashchips.c | 40 ++++++++++++++++++++++++++++++++++++++++
>> flashchips.h | 1 +
>> 2 files changed, 41 insertions(+)
>>
>> diff --git a/flashchips.c b/flashchips.c
>> index c60514b..99b79db 100644
>> --- a/flashchips.c
>> +++ b/flashchips.c
>> @@ -6243,26 +6243,66 @@ const struct flashchip flashchips[] = {
>> }, {
>> .eraseblocks = { {1024 * 1024, 1} },
>> .block_erase = spi_block_erase_c7,
>> }
>> },
>> .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
>> .unlock = spi_disable_blockprotect,
>> .write = spi_chip_write_256,
>> .read = spi_chip_read,
>> .voltage = {2700, 3600},
>> },
>>
>> {
>> + .vendor = "GigaDevice",
>> + .name = "GD25VQ41B",
>> + .bustype = BUS_SPI,
>> + .manufacture_id = GIGADEVICE_ID,
>> + .model_id = GIGADEVICE_GD25VQ41B,
>> + .total_size = 512,
>> + .page_size = 256,
>> + /* Lockable Security Registers: 3 * 512B total; read 0x48, write 0x42, erase 0x44 */
>
> I have reversed that change and used 1536B for consistency here as well.
>
>> + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
>> + .tested = TEST_UNTESTED,
>> + .probe = probe_spi_rdid,
>> + .probe_timing = TIMING_ZERO,
>> + .block_erasers =
> ^^^^^^^^^^^^^^^^ spaces not tabs
>> + {
>> + {
>> + .eraseblocks = { { 4 * 1024, 128} },
>> + .block_erase = spi_block_erase_20,
>> + }, {
>> + .eraseblocks = { { 32 * 1024, 16} },
>> + .block_erase = spi_block_erase_52,
>> + }, {
>> + .eraseblocks = { { 64 * 1024, 8} },
>> + .block_erase = spi_block_erase_d8,
>> + }, {
>> + .eraseblocks = { {512 * 1024, 1} },
>> + .block_erase = spi_block_erase_60,
>> + }, {
>> + .eraseblocks = { {512 * 1024, 1} },
>> + .block_erase = spi_block_erase_c7,
>> + }
>> + },
>> + /* TODO: 2nd Status Register; read 0x35 */
>> + .printlock = spi_prettyprint_status_register_bp4_srwd,
>> + .unlock = spi_disable_blockprotect_bp4_srwd,
>> + .write = spi_chip_write_256,
>> + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
>> + .voltage = {2300, 3600},
>
> Good catch! That is exactly the feature of the VQ ("2.5V) family. There
> is a bunch of other chips in that family in case you are not bored
> already by this ;)
> http://www.gigadevice.com/product-series/12.html
>
Thanks! :) No, I am not bored by this. :P I'll look into them. And when I am done I'll send them in one comfortable patch. ;)
>> + },
>> +
>> + {
>> .vendor = "Hyundai",
>> .name = "HY29F002T",
>> .bustype = BUS_PARALLEL,
>> .manufacture_id = HYUNDAI_ID,
>> .model_id = HYUNDAI_HY29F002T,
>> .total_size = 256,
>> .page_size = 256 * 1024,
>> .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */
>> .tested = TEST_OK_PRE,
>> .probe = probe_jedec,
>> .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
>> .block_erasers =
>> {
>> diff --git a/flashchips.h b/flashchips.h
>> index 74c44a0..e469363 100644
>> --- a/flashchips.h
>> +++ b/flashchips.h
>> @@ -368,26 +368,27 @@
>> #define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */
>> #define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */
>> #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */
>> #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */
>> #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */
>> #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */
>> #define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */
>> #define GIGADEVICE_GD25LQ40 0x6013
>> #define GIGADEVICE_GD25LQ80 0x6014
>> #define GIGADEVICE_GD25LQ16 0x6015
>> #define GIGADEVICE_GD25LQ32 0x6016
>> #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */
>> #define GIGADEVICE_GD25LQ128 0x6018
>> +#define GIGADEVICE_GD25VQ41B 0x4213
>> #define GIGADEVICE_GD29GL064CAB 0x7E0601
>>
>> #define HYUNDAI_ID 0xAD /* Hyundai */
>> #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */
>> #define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */
>> #define HYUNDAI_HY29LV800B 0x5B
>> #define HYUNDAI_HY29F040A 0xA4
>> #define HYUNDAI_HY29F400B 0xAB /* Same as HY29F400AB */
>> #define HYUNDAI_HY29F002B 0x34
>> #define HYUNDAI_HY29F002T 0xB0
>> #define HYUNDAI_HY29LV400T 0xB9
>> #define HYUNDAI_HY29LV400B 0xBA
>> #define HYUNDAI_HY29F080 0xD5
>
> I have fixed the few issues myself, acked the patch and committed it in
> r1937. Thanks!
>
--
Kind Regards,
Hatim Kanchwala
http://hatimak.me
B. Tech. Electrical Engineering
Indian Institute of Technology Patna
More information about the flashrom
mailing list