[flashrom] DQ965GF

Tue May 15 02:19:53 CEST 2012

Hello, as written in flashrom I'm sending verbose log which is from Intel
DQ965GF motherboard running Q965, Mandriva 2010.2 as OS. it has SST25VF016B
Bioschip.

flashrom v0.9.5.2-r1515 on Linux 2.6.33.7-desktop-2mnb (i686), built with
libpci 3.1.7, GCC 4.6.1 20110627 (Mandriva), little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1852M loops per
second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1004 us, 10000 myus
= 10143 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "                                "
DMI string system-product-name: "                                "
DMI string system-version: "                        "
DMI string baseboard-manufacturer: "Intel Corporation"
DMI string baseboard-product-name: "DQ965GF"
DMI string baseboard-version: "AAD41676-400"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH8DO" with PCI ID 8086:2814. Enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xa
WARNING: Setting 0xdc from 0xa to 0xb on ICH8DO failed. New value is 0xa.
Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3020
0x04: 0xe008 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1
WARNING: SPI Configuration Lockdown activated.
Reading OPCODES... done
0x06: 0x3f00 (HSFC)
HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0
0x08: 0x00000000 (FADDR)
0x50: 0x00000a0b (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b
0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region
(0x00000000-0x00000fff) is read-only.
0x58: 0x01ff0120 FREG1: BIOS region (0x00120000-0x001fffff) is read-write.
0x5C: 0x011f0003 FREG2: WARNING: Management Engine region
(0x00003000-0x0011ffff) is locked.
0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is
read-write.
0x64: 0x00000000 FREG4: WARNING: Platform Data region
(0x00000000-0x00000fff) is locked.
Please send a verbose log to flashrom at flashrom.org if this board is not
listed on
http://flashrom.org/Supported_hardware#Supported_mainboards yet.
Writes have been disabled. You can enforce write support with the
ich_spi_force programmer option, but it will most likely harm your hardware!
If you force flashrom you will get no support if something breaks.
0x90: 0x00 (SSFS)
SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0
0x91: 0x004200 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0
0x94: 0x0006     (PREOP)
0x96: 0x0008     (OPTYPE)
0x98: 0x0000ab9f (OPMENU)
0x9C: 0x00000000 (OPMENU+4)
0xC1: 0xffffffff (VSCC)
VSCC: BES=0x3, WG=1, WSR=1, WEWS=1, EO=0xff, VCL=1

Enabling hardware sequencing because some important opcode is locked.
SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS,
continuing anyway
The following protocols are supported: FWH, Programmer-specific.
Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash
chip with a density of 2048 kB.
There is only one partition containing the whole address space (0x000000 -
0x1fffff).
There are 512 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (2048 kB,
Programmer-specific) at physical address 0x0.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x4b, id2 0x93, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x4b, id2 0x93,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x5a, id2 0x47,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x4b, id2
0x93, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x0c, id2
0xe1, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x5a, id2
0x47, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x4b, id2 0x93, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x5a, id2
0x47, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x5a, id2
0x47, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x5a, id2
0x47, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x4b, id2
0x93, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1
0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Found Programmer flash chip "Opaque flash chip" (2048 kB,
Programmer-specific).
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0xdc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20120515/0d3e0329/attachment.html>