[flashrom] Raspberry pi and winbond 25q32

[Stefan Tauner]

On Sun, 28 Sep 2014 15:54:10 +0200
Manuel <ciaociaciaocia at gmail.com> wrote:

> I have Tried to flash the w25q32 that is soldered on my motherboard using
> raspberry pi. I have verified that alla the connections are right, and i
> also have connected wp and hold to vcc.
> Also i have used short cables, and i have soldered them directly to the
> chip.
> Anyway it doesn't recognize the chip

If I read that correctly the chip is still soldered to the mainboard
(additionally to the programmer wires). In that case #3 from the
problems listed at http://flashrom.org/ISP might apply.

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner