[flashrom] [PATCH] Fix wrong density encoding on Intel Silvermont.

[Tai-Hong (Type) Wu]

Update 01/06:
=> Verified, r1861 looks OK at Rangeley dual flash platforms;
     and the regression of single flash remained OK as well.

------------------------------------------
*r1861 (Dual Flash, 2*16 MB)*
------------------------------------------
Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash
chips with a combined density of 32768 kB.
There is only one partition containing the whole address space (0x000000 -
0x1ffffff).
There are 8192 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (32768 kB,
Programmer-specific) mapped at physical address 0x0000000000000000.
Found Programmer flash chip "Opaque flash chip" (32768 kB,
Programmer-specific).
Reading flash... Reading 33554432 bytes starting at 0x000000.



------------------------------------------
*r1860 (Dual Flash, 2*16 MB)*
------------------------------------------
Density of ICH SPI component with index 0 is invalid.Encoded density is 0xd
while maximum allowed is 0x7.
Could not determine density of flash component 0.
FAILED!
FATAL ERROR!


------------------------------------------
*r1861 (Single Flash, 1*8 MB)*
------------------------------------------
Found Programmer flash chip "Opaque flash chip" (8192 kB,
Programmer-specific).
Reading flash... Reading 8388608 bytes starting at 0x000000.

------------------------------------------
*r1860 (Single Flash, 1*8 MB)*
------------------------------------------
Found Programmer flash chip "Opaque flash chip" (8192 kB,
Programmer-specific).
Reading flash... Reading 8388608 bytes starting at 0x000000





2015-01-06 7:01 GMT+08:00 Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>:

> On Mon, 5 Jan 2015 15:41:13 +0800
> "Tai-Hong (Type) Wu" <thwu at lunartoday.com> wrote:
>
> >       Thanks for the review and remedy.
> >       Certainly, I will again verify the patch once it being committed
> into
> > official svn-stream  (Looks not in r1860 yet?)
> >       and/or 0.9.8-release.
>
> OK, I normally prefer tests before committing anything, but I hope
> there won't be a problem here. I have committed the change in r1861.
> Thanks for your help!
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20150106/ee6e3dae/attachment.html>